The spar buoy platform for offshore wind turbines is the most utilized type and the OC3 Hywind system design is largely used in research. This system is usually moored with three catenary cables with 120° between each other. Adding clump weights to the mooring lines has an influence on the platform response and on the mooring line tension. However, the optimal choice for their position and weight is still an open issue, especially considering the multitude of sea states the platform can be exposed to. In this study, therefore, an analysis on the influence of two such variables on the platform response and on the mooring line tension is presented. FAST by the National Renewable Energy Laboratory (NREL) is used to perform time domain simulations and Response Amplitude Operators are adopted as the main indicators of the clump weights effects. Results show that the clump weight mass is not as influential as the position, which turns out to be optimal, especially for the Surge degree of freedom, when closest to the platform.

Floating modular energy islands (FMEIs) are modular, interconnected floating structures designed to collectively produce, store, convert, and transport renewable energy. This review aims to establish a foundation for developing innovative approaches to sustainably harness multi-energy sources in offshore environments. It leverages existing technological expertise while exploring new solutions to address specific challenges associated with FMEIs. The review initially presents existing technologies for floating energy structures and assesses their applicability to FMEI. The structural materials that could be utilised for the construction of a floating energy island are subsequently reviewed. Next, the offshore construction technologies suitable for FMEI are reviewed. Finally, studies on the life cycle assessment of hybrid energy systems are examined, highlighting the environmental advantages of integrating multiple renewable energy sources, thereby underscoring the potential of FMEIs.