The deposition of an overlay of higher refractive index than the cladding in a Long Period Fiber Grating (LPFG) permits to improve the sensitivity to ambient refractive index changes in a great manner. When the overlay is thick enough, one of the cladding modes is guided by the overlay. This causes important shifts in the effective index values of the cladding modes, and henceforward fast shifts of the resonance wavelength of the attenuations bands in the transmission spectrum. This could be applied for improving the sensitivity of LPFG sensors. The problem is analysed with a numerical method based on LP mode approximation and coupled mode theory, which agrees with so far published experimental results.
24 November 2009 in Journal of Lightwave Technology
Surface plasmon resonances and lossy mode resonances (LMRs) can be generated with indium tin oxide (ITO) coated optical fibers. Both phenomena are analyzed and compared. LMRs present important advantages: they do not require a specific polarization of light, it is possible to generate multiple attenuation bands in the transmission spectrum, and the sensitivity of the device to external parameters can be tuned. The key parameter is the thickness of the ITO coating. The study is supported with both theoretical and experimental results. The main purposes are sensing and generation of multiple-wavelength filters.
A wide range of applications such as health, human comfort, agriculture, food processing and storage, and electronic manufacturing, among others, require fast and accurate measurement of humidity. Sensors based on optical fibers present several advantages over electronic sensors and great research efforts have been made in recent years in this field. The present paper reports the current trends of optical fiber humidity sensors. The evolution of optical structures developed towards humidity sensing, as well as the novel materials used for this purpose, will be analyzed. Well-known optical structures, such as long-period fiber gratings or fiber Bragg gratings, are still being studied towards an enhancement of their sensitivity. Sensors based on lossy mode resonances constitute a platform that combines high sensitivity with low complexity, both in terms of their fabrication process and the equipment required. Novel structures, such as resonators, are being studied in order to improve the resolution of humidity sensors. Moreover, recent research on polymer optical fibers suggests that the sensitivity of this kind of sensor has not yet reached its limit. Therefore, there is still room for improvement in terms of sensitivity and resolution.
1 September 2000 in Sensors and Actuators B: Chemical