We determined the dielectric function of the alloy system (Alx )2O3 by spectroscopic ellipsometry in the wide spectral range from 0.5 eV to 8.5 eV and for Al contents ranging from x = 0.11 to x = 0.55. For the composition range x < 0.4, we observe single phase material in the β-modification and for larger Al content also the occurrence of γ-(Al,Ga)2O3. We derived spectra of the refractive index and the absorption coefficient as well as energy parameters of electronic band-band transitions by model analysis of the dielectric function. The dependence of the dielectric functions lineshape and the energy parameters on x is highly continuous, reflecting theoretical expectations. The data presented here provide a basis for a deeper understanding of the electronic properties of this material system and may be useful for device engineering.
, , , , and thin films were fabricated by pulsed laser deposition at high and low temperatures resulting in crystalline single‐phase normal, inverse, as well as disordered spinel oxide thin films with smooth surface morphology. The dielectric function, determined by spectroscopic ellipsometry in a wide spectral range from 0.5 to 8.5 eV, is compared with the magneto‐optical response of the dielectric tensor, investigated by magneto‐optical Kerr effect spectroscopy in the spectral range from 1.7 to 5.5 eV with an applied magnetic field of 1.7 T. Crystal field, inter‐valence, and inter‐sublattice charge transfer transitions, and transitions from to metal cation 3d or 4s bands are identified in both the principal diagonal elements and the magneto‐optically active off‐diagonal elements of the dielectric tensor. Depending on the degree of cation disorder, resulting in local symmetry distortion, the magneto‐optical response is found to be strongest for high crystal quality inverse spinels and for disordered normal spinel structure, contrary to the first principle studies of and . The results presented provide a basis for deeper understanding of light–matter interaction in this material system that is of vital importance for device‐related phenomena and engineering.
The recent developments in the study of magnetic properties in the spinel zinc ferrite system are explored. Engineering of ionic valence and site distribution allows tailoring of magnetic interactions. Recent literature is reviewed, and own investigations are presented for a conclusive understanding of the mechanisms responsible for the magnetic behavior in this material system. By varying the Zn‐to‐Fe ratio, the deposition, as well as thermal annealing conditions, ZnFe2O4 thin films with a wide range of crystalline quality are produced. In particular, the focus is on the magnetic structure in relation to spectroscopic properties of disordered ZnFe2O4 thin films. Comparing the cation distribution in film bulk (optical transitions in the dielectric function) and near‐surface region (X‐ray absorption), it is found that an inhomogeneous cation distribution leads to a weaker magnetic response in films of inverse configuration, whereas defects in the normal spinel are likely to be found at the film surface. The results show that it is possible to engineer the defect distribution in the magnetic spinel ferrite film structure and tailor their magnetic properties on demand. It is demonstrated that these properties can be read out optically, which allows controlled growth of the material and applications in future magneto‐optical devices.
The full dielectric tensor of monoclinic Ga2O3 (β-phase) was determined by generalized spectroscopic ellipsometry in the spectral range from 1.0 eV up to 8.5 eV and temperatures in the range from 10 K up to 300 K. By using the oriented dipole approach, the energies and broadenings of the excitonic transitions are determined as a function of the temperature, and the exciton-phonon coupling properties are deduced.
The last missing piece of the puzzle for the full functionalization of group IV optoelectronic devices is a direct bandgap semiconductor made by CMOS compatible technology. Here, we report on the fabrication of GeSn alloys with Sn concentrations up to 4.5% using ion implantation followed by millisecond-range explosive solid phase epitaxy. The n-type single crystalline GeSn alloys are realized by co-implantation of Sn and P into Ge. Both the activation of P and the formation of GeSn are performed during a single-step flash lamp annealing for 3 ms. The bandgap engineering in GeSn as a function of the doping level and Sn concentration is theoretically predicted by density functional theory and experimentally verified using ellipsometric spectroscopy. We demonstrate that both the diffusion and the segregation of Sn and P atoms in Ge are fully suppressed by millisecond-range nonequilibrium thermal processing.
with a quasi-direct band gap can be realized by strain engineering, alloying with , or ultrahigh n-type doping. In this work, we use all three approaches together to fabricate direct-band-gap alloys. The heavily doped n-type is realized with CMOS-compatible nonequilibrium material processing. is used to form highly doped n-type layers and to modify the lattice parameter of -doped alloys. The strain engineering in heavily--doped films is confirmed by x-ray diffraction and micro Raman spectroscopy. The change of the band gap in -doped alloy as a function of concentration is theoretically predicted by density functional theory and experimentally verified by near-infrared spectroscopic ellipsometry. According to the shift of the absorption edge, it is shown that for an electron concentration greater than 1 × 10 cm the band-gap renormalization is partially compensated by the Burstein-Moss effect. These results indicate that -based materials have high potential for use in near-infrared optoelectronic devices, fully compatible with CMOS technology.