Among the families of iron-based superconductors, the 11-family is one of the most attractive for high field applications at low temperatures. Optimization of the fabrication processes for bulk, crystalline and/or thin film samples is the first step in producing wires and/or tapes for practical high power conductors. Here we present the results of a comparative study of pinning properties in iron-chalcogenides, investigating the flux pinning mechanisms in optimized Fe(Se Te x ) and FeSe samples by current–voltage characterization, magneto-resistance and magnetization measurements. In particular, from Arrhenius plots in magnetic fields up to 9 T, the activation energy is derived as a function of the magnetic field, whereas the activation energy as a function of temperature, is derived from relaxation magnetization curves. The high pinning energies, high upper critical field versus temperature slopes near critical temperatures, and highly isotropic pinning properties make iron-chalcogenide superconductors a technological material which could be a real competitor to cuprate high temperature superconductors for high field applications.
5 December 2017 in Superconductor Science and Technology
The correlation between the appearance of a peak effect in the critical current of a superconducting material and the presence of twin boundaries, involved in a crossover between different pinning regimes, is investigated by means of dc magnetic measurements on a FeSe 0.5 Te 0.5 crystal. In particular, by analyzing the temperature dependence of the critical current density Jc ( T ) for different magnetic fields H , a crossover from a weak pinning regime to a strong pinning regime has been revealed. The analysis shows that this crossover can be ascribed to the presence of twin boundary defects inside the sample, and can be associated to the onset of the peak effect and interpreted as the start of the vortex dynamic processes responsible for the increase of Jc with the field. On the basis of the information extracted by our analysis, a plausible dynamic scenario involving the contribution of the different pinning regimes depending on the applied field has been described, and the relative H ( T ) vortex phase diagram has been determined. Moreover, in our description, the peak in the Jc ( H ) curve corresponds to the end of the processes leading to the peak effect and it is confirmed to be related to the transition from an elastic to a plastic deformation regime in the vortex lattice.
The magnetic behavior of an iron-based FeSe crystal sample has been studied by means of dc magnetization measurements as a function of the temperature (T), the dc magnetic field (H) and the time (t). The M(T) curves show a discrepancy in the determination of the onset of the critical temperature TC with respect to what is observed in the superconducting M(H) measurements obtained by subtracting the ferromagnetic background from the curves measured at various temperatures. By using magnetic relaxation measurements M(t), the correct value of TC has been obtained. Moreover, the superconducting M(H) loops show the presence of a noisy signal up to an anomalous 'peak effect' only found for positive and negative increasing fields. These features have been analyzed by fitting the temperature dependence of the critical current density Jc(T), extracted from the M(H) loops, with the help of the Jc(T) dependencies governing an S–N–S junction network. This analysis has allowed us to interpret the behavior found in the M(H) loops and to obtain the value of the intrinsic critical current density J0 which is not influenced by the presence of the junctions.
The correlation in type-II superconductors between the creep rate S and the Second Magnetization Peak (SMP) phenomenon which produces an increase in Jc, as a function of the field (H), has been investigated at different temperatures by starting from the minimum in S(H) and the onset of the SMP phenomenon detected on a FeSe0.5Te0.5 sample. Then the analysis has been extended by considering the entire S(H) curves and comparing our results with those of many other superconducting materials reported in literature. In this way, we find evidence that the flux dynamic mechanisms behind the appearance of the SMP phenomenon in Jc(H) are activated at fields well below those where the critical current starts effectively to increase. Moreover, the found universal relation between the minimum in the S(H) and the SMP phenomenon in Jc(H) shows that both can be attributed to a sequential crossover between a less effective pinning (losing its effectiveness at low fields) to a more effective pinning (still acting at high fields), regardless of the type-II superconductor taken into consideration.