5-Ethoxymethylfurfural (EMF) can be prepared from the corresponding halomethylfurfural and absolute ethanol in good yield. The use of significantly more affordable 96% ethanol results in formation of levulinic acid or its ester in considerable amount (up to 16%), which is difficult to separate from the desired EMF. In the present study we report that the addition of oil shale ash prevents the hydrolysis of the furan ring and enables the use of 96% ethanol with great success. The developed procedure is applicable to a wide range of aqueous alcohols, is operationally simple and utilizes an inexpensive basic ash, which is deposited in millions of tons per year. Notably, the basicity of the ash is decreased during the process, making its deposits less hazardous to the environment.
19 May 2023 in ACS Sustainable Chemistry & Engineering
Reversible crosslinking offers an attractive strategy to modify and improve the properties of polymer materials while concurrently enabling a pathway for chemical recycling. This can, for example, be achieved by incorporating a ketone functionality into the polymer structure to enable post-polymerization crosslinking with dihydrazides. The resulting covalent adaptable network contains acylhydrazone bonds cleavable under acidic conditions, thereby providing reversibility. In the present work, we regioselectively prepare a novel isosorbide monomethacrylate with a pendant levulinoyl group via a two-step biocatalytic synthesis. Subsequently, a series of copolymers with different contents of the levulinic isosorbide monomer and methyl methacrylate are prepared by radical polymerization. Using dihydrazides, these linear copolymers are then crosslinked via reaction with the ketone groups in the levulinic side chains. Compared to the linear prepolymers, the crosslinked networks exhibit enhanced glass transition temperatures and thermal stability, up to 170 and 286 °C, respectively. Moreover, the dynamic covalent acylhydrazone bonds are efficiently and selectively cleaved under acidic conditions to retrieve the linear polymethacrylates. We next show that recovered polymers can again be crosslinked with adipic dihydrazide, thus demonstrating the circularity of the materials. Consequently, we envision that these novel levulinic isosorbide-based dynamic polymethacrylate networks have great potential in the field of recyclable and reusable biobased thermoset polymers.
We describe a method for the conversion of 5-ethoxymethylfurfural (EMF) into substituted cyclopentenones in a stereoselective manner through application of the Piancatelli rearrangement. The strategy allows the utilization of biomass-derived C6-carbohydrates for the production of cyclopentenones, making them a possible platform chemical for the sustainable chemical industry.
Introducing biobased polymers from renewable sources for use as high-performance thermoplastics with high demands on mechanical rigidity, transparency, thermal stability, as well as good processability, is a significant challenge. In the present work we have designed and prepared a rigid biobased bis-spirocylic diol by di-cycloketalization of a bicyclic diketone (cis-bicyclo[3.3.0]octane-3,7-dione, obtained from citric acid) using trimethylolpropane. This spiro-diol monomer has two reactive primary hydroxyl groups and the synthesis from inexpensive biobased starting materials is straightforward and readily upscalable, involving no chromatographic purification. In order to explore the usefulness of the new monomer, it was employed in melt polycondensations with diphenylcarbonate at up to 280 °C to form rigid fully amorphous polycarbonates (PCs). Molecular weights (MWs) up to Mn = 28 kg mol-1 were achieved, and thermal and dynamic mechanical measurements showed glass transitions up to Tg = 100 °C, with no thermal decomposition until Td ∼ 350 °C. Solvent cast films had excellent mechanical flexibility and strength, as well as a high transparency with only slight coloration. Results by dynamic melt rheology implied that the high-MW PCs had a good processability at 170 °C, with a stable shear modulus over time, but started to degrade via chain scission reactions when the temperature approached 200 °C. In conclusion, the present work demonstrates the straightforward preparation of the citric acid-based spiro-diol, and indicates that it is an efficient building block for the preparation of rigid biobased PCs and other condensation polymers.
We have prepared a series of 12 d-isosorbide-2-alkanoate-5-methacrylate monomers as single regioisomers with different pendant linear C2–C20 alkanoyl chains using biocatalytic and chemical acylations. By conventional radical polymerization, these monomers provided high-molecular-weight biobased poly(alkanoyl isosorbide methacrylate)s (PAIMAs). Samples with C2–C12 alkanoyl chains were amorphous with glass transition temperatures from 107 to 54 °C, while C14–C20 chains provided semicrystalline materials with melting points up to 59 °C. Moreover, PAIMAs with C13–C20 chains formed liquid crystalline mesophases with transition temperatures up to 93 °C. The mesophases were studied using polarized optical microscopy, and rheology showed stepwise changes of the viscosity at the transition temperature. Unexpectedly, a PAIMA prepared from a regioisomeric monomer (C18) showed semicrystallinity but not liquid crystallinity. Consequently, the properties of the PAIMAs were readily tunable by controlling the phase structure and transitions through the alkanoyl chain length and the regiochemistry to form fully amorphous, semicrystalline, or semi/liquid crystalline materials.
Environmental impact of isosorbide-based monomers and polymers have been evaluated towards bacteria, plants and invertebrates. Isosorbide acrylates show toxicity towards higher organisms while other tested mono- and polymeric compounds are harmless.