Florida geologic units and soils contain a wide range in concentrations of naturally-occurring arsenic. The average range of bulk rock concentrations is 1 to 13.1 mg/kg with concentrations in accessary minerals being over 1000 mg/kg. Florida soils contain natural arsenic concentrations which can exceed 10 mg/kg in some circumstances, with organic-rich soils often having the highest concentrations. Anthropogenic sources of arsenic have added about 610,000 metric tons of arsenic into the Florida environment since 1970, thereby increasing background concentrations in soils. The anthropogenic sources of arsenic in soils include: pesticides (used in Florida beginning in the 1890’s), fertilizers, chromated copper arsenate (CCA)-treated wood, soil amendments, cattle-dipping vats, chicken litter, sludges from water treatment plants, and others. The default Soil Cleanup Target Level (SCTL) in Florida for arsenic in residential soils is 2.1 mg/kg which is below some naturally-occurring background concentrations in soils and anthropogenic concentrations in agricultural soils. A review of risk considerations shows that adverse health impacts associated with exposure to arsenic is dependent on many factors and that the Florida cleanup levels are very conservative. Exposure to arsenic in soils at concentrations that exceed the Florida default cleanup level set specifically for residential environments does not necessarily pose a meaningful a priori public health risk, given important considerations such as the form of arsenic present, the route(s) of exposure, and the actual circumstances of exposure (e.g., frequency, duration, and magnitude).

Southern Florida is underlain by rocks and sediments that naturally contain radioactive isotopes. The primary origin of the radioactive isotopes is Miocene-aged phosphate deposits that can be enriched in uranium-238 and its daughter isotopes. Nodular phosphate containing radionuclides from the Miocene has been reworked into younger formations and is ubiquitous in southern Florida. When the nodular phosphate is exposed to groundwater with geochemical conditions favorable for its dissolution, uranium, radium, and radon may be released into the groundwater system. Uranium concentrations have been measured above the 30 µg/L drinking water standard at only one location in Lee County. Radium226/228 exceedances of the drinking water standard have been documented in numerous wells in Sarasota County. Indoor radon activities have exceeded the 4 piC/L guideline in five southern Florida counties. The exceedance of radioactivity standards in drinking water does not occur in municipal drinking water supplies, but rather only in some domestic self-supply wells. Health risks for exposure to radiation from domestic self-supply wells could be mitigated by testing of well water and, if necessary, switching to the use of a different aquifer or treatment process. While the risk of exposure to radon in indoor air in southern Florida is generally low, some areas are enriched in soil radon that migrates into structures, which could be addressed by improved ventilation.

Southwest Florida is one of the most rapidly growing regions of the United States and has been impacted over the past decade with water-quality issues and some associated health problems. The ionic ratios of the dust measured in southwest Florida vary significantly from those on the Florida east coast and in the Caribbean. The metals concentrations reported herein are enriched in potassium and calcium from local sources. Atmospheric deposition of metals and nutrients appears to have potential impacts on both indirect health problems and environmental issues of concern, particularly harmful algal blooms. However, no significant past research has been performed on measurement of the concentration of either metals including the micronutrient iron or nutrient concentrations occurring in atmospheric dry and wet fallout in southwest Florida. Measurements of the composition of key metals and nutrients were made over a one-year period. Concentrations of total phosphorus in the dust ranged from 0–80.5 mg/kg with an average of 4 mg/kg and in rainfall from 1–15.8 чg/L with an average of 4 mg/kg. Nitrate ranged from 0–746 чg/L with an average of 114.4 чg/L in rainfall in a soluble form, and from 1.3 to 718 mg/kg with an average of 209.9 mg/kg in an insoluble form. Ammonia was measured to range from 1.4 to 658 mg/kg with an average of 101.4 mg/kg in rainfall. Iron was found in the dust at concentrations ranging from 0–81 mg/kg with an average of 3.8 mg/kg and in rainfall from 0–125.7 mg/kg with an average of 3.0 mg/kg. While the measured nutrient and iron concentrations are not likely to initiate a harmful algal bloom, they are likely to sustain an existing bloom. Global climate change may exacerbate the atmospheric aerosol issue by increased wind speeds over Africa associated with longer term drought conditions caused by atmospheric temperature increases.

Isopropylbenzene (cumene) is commonly encountered in groundwater at petroleum release sites due to its natural occurrence in crude oil and historical use as a fuel additive. The cumene concentrations detected at these sites often exceed regulatory guidelines or standards for states with stringent groundwater regulations. Recent laboratory analytical data collected at historical petroleum underground storage tank (UST) release sites have revealed that cumene persists at concentrations exceeding the default cleanup criterion, while other common petroleum constituents are below detection limits or low enough to allow natural attenuation as a remediation strategy. This effectively makes cumene the driver for active remediation at some sites. An insignificant amount of research has been conducted for the in-situ remediation of cumene. Sulfate Enhanced Biodegradation (SEB) is evaluated in a field case study. The results from the field case study show an approximate 92% decrease in plume area following three rounds of SEB injections. An additional objective of this research was to determine the cumene concentration in fuels currently being used to determine future impacts. A review of safety data sheets from several fuel suppliers revealed that cumene concentrations in gasoline are reported typically as wide ranges due to the proprietary formulations. Several fuels from different suppliers were analyzed to determine a baseline of cumene concentration in modern fuels. The results of the analysis indicated that cumene accounts for approximately 0.01% (diesel) to 0.13% (premium gasoline) of the overall fuel composition. Cumene generally is considered to be of low human health toxicity, with the principal concern being eye, skin, and respiratory irritation following inhalation of vapors in an occupational setting, but it has been regulated in Florida at very low concentrations based on organoleptic considerations.

State regulators in Florida recently approved a first-of-its-kind probabilistic risk assessment (PRA) for determining an alternative residential Soil Cleanup Target Level (SCTL) for dioxin (32 ng/kg TEQ). The default residential SCTL (7 ng/kg TEQ) is based on a single, deterministic calculation with numerous conservative assumptions, resulting in an overly conservative value far beyond the regulatory mandate (i.e., 10⁻⁶ increase in cancer risk). Conversely, this PRA used a Monte Carlo simulation to estimate risk for all members of a large population using a combination of scientific data and professional judgment, with final details developed during negotiations with regulators. The simulation parameters were defined probabilistically and reflect the ranges of values for the following exposure variables: body weight, exposure duration, exposure frequency, fraction from contaminated source, soil ingestion rate, and relative bioavailability. Other variable and uncertain parameters were treated deterministically per direction from the regulators. The state also required that a pre-supposed high-risk subpopulation be analyzed separate from the full receptor population. Despite the conservativeness of the alternative SCTL, this PRA represents a significant step toward more realistic estimates of human health risks caused by environmental contaminant exposure.