The recycling of spent lithium-ion batteries (Li-ion Batteries) has drawn a lot of interest in recent years in response to the rising demand for the corresponding high-value metals and materials and the mounting concern emanating from the detrimental environmental effects imposed by the conventional disposal of solid battery waste. Numerous studies have been conducted on the topic of recycling used Li-ion batteries to produce either battery materials or specific chemical, metal or metal-based compounds. Physical pre-treatment is typically used to separate waste materials into various streams, facilitating the effective recovery of components in subsequent processing. In order to further prepare the recovered materials or compounds by applying the principles of materials chemistry and engineering, a metallurgical process is then utilized to extract and isolate pure metals or separate contaminants from a particular waste stream. In this review, the current state of spent Li-ion battery recycling is outlined, reviewed, and analyzed in the context of the entire recycling process, with a particular emphasis on hydrometallurgy; however, electrometallurgy and pyrometallurgy are also comprehensively reviewed. In addition to the comprehensive review of various hydrometallurgical processes, including alkaline leaching, acidic leaching, solvent (liquid-liquid) extraction, and chemical precipitation, a critical analysis of the current obstacles to process optimization during Li-ion battery recycling is also conducted. Moreover, the energy-intensive nature of discussed recycling process routes is also assessed and addressed. This study is anticipated to offer recommendations for enhancing wasted Li-ion battery recycling, and the field can be further explored for commercialization.

The development of highly stable and active electrocatalysts for the oxygen evolution reaction (OER) has attracted significant research interest. IrO₂ is known to show good stability during the OER however it is not known to be the most active. Thus, significant research has been dedicated to enhance the activity of IrO₂ toward the OER. In this study, IrO₂ catalysts were synthesized using a modified Adams fusion method. The Adams fusion method is simple and is shown to directly produce nano-sized metal oxides. The effect of the Ir precursor salt to the NaNO₃ ratio and the fusion temperature on the OER activity of the synthesized IrO₂ electrocatalysts, was investigated. The OER activity and durability of the IrO₂ electrocatalysts were evaluated ex-situ via cyclic voltammetry (CV), chronopotentiometry (CP), electrochemical impedance spectroscopy (EIS) and linear sweep voltammetry (LSV). Physical properties of the IrO₂ electrocatalysts were evaluated via X-ray diffraction (XRD), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), differential thermal analysis (DTA), and energy dispersive spectroscopy (EDS). The results show that the addition of excess NaNO₃ during the modified Adams fusion reaction is not a requirement and that higher synthesis temperatures results in IrO₂ electrocatalysts with larger particle sizes and reduced electrocatalytic activity.

Water plays an essential role in production and refining processes. Many industries that use petrochemicals also require water, especially for cleaning purposes. The wastewaters released by these processes are often rich in petroleum pollutants, which requires significant treatment prior to disposal. The presence of petroleum contaminants in rivers and oceans is a significant threat to human health, as well as to many animal species. A current challenge for most industries and conventional effluent treatment plants is compliance with accepted disposal standards for oil-polluted wastewater. Of particular importance is the processing of dispersed oil in water, as well as oil in water emulsion. Conventional oil and water separation methods for processing oil in water contamination have several technology gaps in terms of applicability and efficiency. The removal and effective processing of dispersed oil and emulsions from oily wastewater is a costly and significant problem. The objective of this paper is to provide a review of the principles associated with oil in water emulsion separation, with the aim of providing a more definitive understanding of the terminology, processes, and methodologies, which will assist the development of a more efficient, innovative and environmentally friendly process for the separation of oily wastewater.

The agricultural sector is one that requires and consumes enormous amounts of fresh water globally. Commercial wine production in particular uses large volumes of fresh water and, through various processes, generates significant quantities of wastewater. The wastewater produced by wineries typically exhibits elevated levels of chemical oxygen demand (COD), total suspended solids (TSS), an acidic pH, and varying salinity and nutrient contents. The overall characteristics of winery wastewater indicate that it is a potential environmental hazard if not processed and disposed of appropriately. Due to significant variations in wastewater contaminant levels among wineries, the implementation of a universally applicable, environmentally friendly, and sustainable waste management system seems practically unattainable. This study investigated the design, fabrication, and modification of a shear enhanced flotation separation (SEFS) pilot plant to be used as a primary treatment stage during winery wastewater processing. This technology combines the synergistic advantages of hydrodynamic shear, coagulation, flocculation, and dissolved air flotation. To date, there have been only limited publications on the feasibility and application of hydrodynamic shear and its potential to assist with coagulation/flocculation and flotation efficiencies specifically for winery wastewater treatment. The results obtained indicate that the SEFS pilot plant may well be able to process winery wastewater to a quality level where reuse of the water for irrigation of crops may be considered.