Polarization multispectral imaging (PMI) has been applied widely with the ability of characterizing physicochemical properties of objects. However, traditional PMI relies on scanning each domain, which is time-consuming and occupies vast storage resources. Therefore, it is imperative to develop advanced PMI methods to facilitate real-time and cost-effective applications. In addition, PMI development is inseparable from preliminary simulations based on full-Stokes polarization multispectral images (FSPMI). Whereas, FSPMI measurements are always necessary due to the lack of relevant databases, which is extremely complex and severely limits PMI development. In this paper, we therefore publicize abundant FSPMI with 512 × 512 spatial pixels measured by an established system for 67 stereoscopic objects. In the system, a quarter-wave plate and a linear polarizer are rotated to modulate polarization information, while bandpass filters are switched to modulate spectral information. The required FSPMI are finally calculated from designed 5 polarization modulation and 18 spectral modulation. The publicly available FSPMI database may have the potential to greatly promote PMI development and application.
1 November 2020 in Chemometrics and Intelligent Laboratory Systems
Polarized hyperspectral imaging, which has been widely studied worldwide, can obtain four-dimensional data including polarization, spectral, and spatial domains. To simplify data acquisition, compressive sensing theory is utilized in each domain. The polarization information represented by the four Stokes parameters currently requires at least two compressions. This work achieves full-Stokes single compression by introducing deep learning reconstruction. The four Stokes parameters are modulated by a quarter-wave plate (QWP) and a liquid crystal tunable filter (LCTF) and then compressed into a single light intensity detected by a complementary metal oxide semiconductor (CMOS). Data processing involves model training and polarization reconstruction. The reconstruction model is trained by feeding the known Stokes parameters and their single compressions into a deep learning framework. Unknown Stokes parameters can be reconstructed from a single compression using the trained model. Benefiting from the acquisition simplicity and reconstruction efficiency, this work well facilitates the development and application of polarized hyperspectral imaging.
Polarization multispectral imaging has advanced significantly due to its robust information representation capability. Imaging application requires rigorous simulation evaluation and experimental validation using standardized datasets. However, the current full-Stokes polarization multispectral images (FSPMI) dataset, while providing simulation data, is limited by image drift and spectral bands. To overcome these limitations and supplement experimental data, this paper introduces the multi-angle and full-Stokes polarization multispectral images (MAFS-PMI) dataset. The imaging system utilizes a rotatable quarter-wave plate (QWP) and a fixed liquid crystal tunable filter (LCTF) to modulate polarization information. Meanwhile, the LCTF allows switching between multiple spectral bands. The acquired multi-angle polarization multispectral images facilitate the experimental validation of encoding strategies and reconstruction algorithms. Additionally, the derived full-Stokes polarization multispectral images enable the simulation evaluation of imaging methods. The MAFS-PMI dataset involves 73 fast axis angles (0° to 180°), four Stokes parameters, five polarization parameters, 35 spectral bands (520 nm to 690 nm), 400 × 400 pixels, and 12 distinct objects. This dataset offers a valuable resource for developing advanced imaging methods.