To improve foam expansion and the stability of the foamed gel selected as the starting point, three foaming agents with relatively higher foam expansion and three foam stabilizers were used to determine optimum gradient and composition of the gel. Sodium laurate and dodecyl trimethyl ammonium bromide at a proportion of 2:3 were observed to produce the desirable foaming property and also created the largest foaming volume after the addition of 0.2% polyethylene glycol as the foam stabilizer. Different concentrations of gelatinizing and cross-linking agents were added to the foamed gel containing the foaming agent and the foam stabilizer. The most suitable ratio of the gelatinizing agent and the cross-linking agent determined on the basis of volume of foam dewatering after the addition of foam stabilizer for 6 h was 0.6%:0.5%. The resulting foamed gel was evaluated for rheological and plugging properties and a decrease in the viscosity of the gel and better plugging effect on coal seam were observed.
The flammability of rigid polyurethane foam (RPUF) limits its application. A new type of chitosan phase-change microcapsule (CS/PCM) was successfully prepared by the condensation method with chitosan and gum acacia as the wall material and paraffin as the core material. CS/PCM was introduced into RPUF composite material as filler to improve the thermal and flame-retardant properties of polyurethane. The morphology, structure, thermal properties and flame retardancy of the materials were characterized by scanning electron microscopy (SEM), X-ray diffractometer (XRD), thermogravimetric (TG) analysis, differential scanning calorimetry (DSC) and cone calorimetry. It is found that when the CS/PCM content is 30 wt%, the latent heat of phase transition of RPUF-30 is 12.308 J/g, the limiting oxygen index (LOI) is 26.1% and the fire risk is reduced. The flame-retardant mechanism shows that the barrier effect provided by chitosan plays an important role in effectively blocking the transfer of heat and combustible gas, and improving the flame-retardant property of the composite. This paper provides a new idea for the application of CS/PCM in RPUF.
The flammability properties of rigid polyurethane foam (RPUF) and phase change materials (PCMs) limit its applicability. This research employed organic montmorillonite (OMMT) and chitosan (CS) as shell materials, with paraffin serving as the core material, to effectively produce innovative OMMT CS phase change microcapsules (OMMT/CS/PCM). The integration of OMMT/CS/PCM into RPUF markedly improved the flame-retardant characteristics of the polyurethane. The performance was extensively assessed using differential scanning calorimetry (DSC) and cone calorimetry. Experimental data reveal that at a content of 30 wt% OMMT/CS/PCM, the phase change latent heat of RPUF-30% OMMT/CS/PCM is 7.514 J g -1 , the limiting oxygen index (LOI) is 32.4%, and the flame retardancy index (FRI) varies from 1 to 20, indicating superior flame-retardant characteristics and a significant reduction in fire risk. OMMT and CS establish a barrier effect that is essential in reducing the diffusion of flammable gases and impeding heat transfer, thereby markedly enhancing the flame-retardant characteristics of the composite material. This work offers novel insights into the utilization of PCMs in RPUF.
13 October 2025 in International Polymer Processing
Double-shell phase change capsules composed of organically modified montmorillonite (OMMT), chitosan (CS), and paraffin wax (PCM) were fabricated using complex coacervation and dry mixing methods. Paraffin served as the core material, CS as the organic shell, and OMMT as the inorganic flame-retardant component. The morphology, thermal stability, flame retardancy, and phase transition kinetics of the capsules were systematically examined. Results indicated that when the mass ratio of OMMT to CS/PCM was 1:1, OMMT was uniformly dispersed on the capsule surface, leading to optimal performance. Thermogravimetric (TG) and microscale combustion calorimetry (MCC) analyses revealed that the incorporation of OMMT significantly improved the thermal stability of the capsules, increased char residue, and markedly reduced both the peak heat release rate (PHRR) and total heat release (THR). The phase change behavior was elucidated through differential scanning calorimetry (DSC). Furthermore, Kissinger’s kinetic model was applied to determine the activation energy, which was found to be higher in the OMMT-containing capsules, suggesting that OMMT addition restricts molecular thermal motion. This study offers both theoretical insights and practical guidelines for designing composite phase change materials that combine high energy storage efficiency with enhanced flame retardancy.
5 June 2026 in Journal of the Indian Chemical Society
In order to further study the problems of urban engineering geological environment, taking Jinan as an example, the environmental engineering geological problems are divided into four aspects: primary environmental engineering geological problems, secondary environmental engineering geological problems, the influence of human activities and the restriction of spring water on engineering construction. A multi-level, multi-objective and multi factor evaluation index system suitable for environmental engineering geology is established. The mathematical model is established by using analytic hierarchy process and fuzzy comprehensive evaluation method to evaluate the primary environmental engineering geological problems, secondary environmental engineering geological problems, the impact of human activities and the restrictive effect of spring water on engineering construction. The mathematical model is established by using Nemero index method to comprehensively evaluate the environmental engineering geological problems in Jinan, and the suitability zoning of engineering construction is carried out.