Lithium-sulfur (Li-S) battery is recognized as one of the promising candidates to break through the specific energy limitations of commercial lithium-ion batteries given the high theoretical specific energy, environmental friendliness, and low cost. Over the past decade, tremendous progress have been achieved in improving the electrochemical performance especially the lifespan by various strategies mainly concentrated on the sulfur cathodes. In this review, the fundamental electrochemistry of sulfur cathode and lithium anode is revealed to understand the current dilemmas. And the advances achieved through diverse strategies are comprehensively summarized, which involves lithium polysulfides (LiPSs) limitation, sulfur redox reaction regulation and electrocatalysis in sulfur cathode and artificial solid electrolyte interface (SEI), electrolyte design, and structured anode in lithium anode. Additionally, the differences between laboratory level coin cells and actual pouch cells need to be addressed that only few reports on practical Li-S pouch cell are available due to the unexpected problems on both sulfur cathode and lithium anode which are masked at lithium and electrolyte excess. Lastly, the challenges and perspective toward the practical Li-S batteries are also offered.
Solar rechargeable flow cells (SRFCs) provide an attractive approach for in situ capture and storage of intermittent solar energy via photoelectrochemical regeneration of discharged redox species for electricity generation. However, overall SFRC performance is restricted by inefficient photoelectrochemical reactions. Here we report an efficient SRFC based on a dual-silicon photoelectrochemical cell and a quinone/bromine redox flow battery for in situ solar energy conversion and storage. Using narrow bandgap silicon for efficient photon collection and fast redox couples for rapid interface charge injection, our device shows an optimal solar-to-chemical conversion efficiency of ∼5.9% and an overall photon–chemical–electricity energy conversion efficiency of ∼3.2%, which, to our knowledge, outperforms previously reported SRFCs. The proposed SRFC can be self-photocharged to 0.8 V and delivers a discharge capacity of 730 mAh l−1. Our work may guide future designs for highly efficient solar rechargeable devices.
High-quality sized FeFe(CN)6 delivered a reversible capacity of 124 mA h g−1 at the current rate of 0.5C for KIB, and still retained a reversible capacity of 93 mA h g−1 at 5C with a coulombic efficiency of 100%.
The practical application of lithium–sulfur (Li–S) batteries is still facing the challenges of lithium polysulfide (LiPS) shuttling and uncontrollable Li2S growth due to the soluble nature and sluggish conversion kinetics of LiPSs. Herein, we propose a universal strategy to synthesize monodisperse iron atom embedded nitrogen-doped mesoporous hollow carbon spheres (Fe–N/MHCS) as multi-effect nanoreactors for sulfur at the atomic level. Using a combination of experimental and theoretical methods, the Fe–N4 center is found to be an efficient electrocatalyst to propel the reversible conversion between LiPSs and Li2S, inhibit the LiPS shuttling and mediate the deposition of Li2S. As a result, S@Fe–N/MHCS exhibits significantly improved rate properties and cycling stability (only 0.0187% capacity fade in 1000 cycles at 1C) without using conductive carbon. Even at a practical high sulfur loading (5.4 mg cm−2) and low E/S ratio (8.0 μL mg−1), the areal capacity reaches 6.4 mA h cm−2 and 81.7% of it is retained after 100 cycles. Furthermore, a S@Fe–N/MHCS pouch cell is also assembled showing exceptional cycling stability with a high capacity retention of 77.1% after 200 cycles. Therefore, this work provides valuable insights into the fundamental understanding of the catalysis mechanism for practical Li–S batteries with high specific energy and prolonged lifespan.
Using bimetal–organic coordination-polymers as precursors and subsequent solid-state reaction with lithium salts, Li2CO3-coated LiNi0.5Mn1.5O4 nanoplates with superior rate capability and cycling stability have been synthesized, and provide a promising cathode candidate for lithium-ion batteries.