With the continuous development of artificial intelligence, data-driven fault diagnosis methods are gradually attracting widespread attention. However, in practical industrial applications, noise in the working environment is inevitable. This leads to the fact that the performance of traditional intelligent diagnosis methods is hardly sufficient to satisfy the requirements. In this paper, a developed intelligent diagnosis framework is proposed to overcome this deficiency. The main contributions of this paper are as follows: Firstly, a fault diagnosis model is established using EfficientNet, which achieves optimal diagnosis performance with limited computing resources. Secondly, an attention mechanism is introduced into the basic model for accurately establishing the relationship between fault features and fault modes, while improving the diagnosis accuracy in complex noise environments. Finally, to explain the proposed method, the weights and features of the model are visualized, and further attempts are made to analyze the reasons for the high performance of the model. The comprehensive experiment results reveal the superiority of the proposed method in terms of accuracy and stability in comparison with other benchmark diagnosis approaches. The diagnostic accuracy under actual working conditions is 86.24%.
Nonlinear vibration characteristics of a moving membrane with variable velocity have been examined. The velocity is presumed as harmonic change that takes place over uniform average speed, and the nonlinear vibration equation of the axially moving membrane is inferred according to the D’Alembert principle and the von Kármán nonlinear thin plate theory. The Galerkin method is employed for discretizing the vibration partial differential equations. However, the solutions concerning to differential equations are determined through the 4th order Runge–Kutta technique. The results of mean velocity, velocity variation amplitude, and aspect ratio on nonlinear vibration of moving membranes are emphasized. The phase‐plane diagrams, time histories, bifurcation graphs, and Poincaré maps are obtained; besides that, the stability regions and chaotic regions of membranes are also obtained. This paper gives a theoretical foundation for enhancing the dynamic behavior and stability of moving membranes.
24 August 2022 in Communications in Nonlinear Science and Numerical Simulation
The coupling effects of flexible joints and clearance on the dynamics of a robotic system were investigated. A numerical analysis was undertaken to reveal the coupling effects between flexible joints and clearance. The nonlinear spring-damping model and Coulomb model were applied to characterize the contact characteristics of the clearance, and a model for the flexible joint was formulated using the equivalent spring theory. An accurate robot model was established based on the clearance and joint flexibility characterization. The dynamic equation of a robot was obtained according to the Newton-Euler method. A comparative analysis was performed to assess the impacts of both the joint action of clearance and flexible joints and varying joint clearance values on the performance of the robot. The results showed that the coupling effects of flexible joints and clearance had a negative impact on the system dynamic performance. The amplitudes of the dynamic responses caused by the clearance are weakened by the flexible joint, but it leads to the lag of the system response. This study served as the theoretical foundation for exploring precise control techniques in robotics research.
30 April 2020 in Journal of Mechanical Science and Technology
In this paper, the nonlinear vibration characteristics of a moving printing membrane under external excitation are studied. Based on the Von Karman nonlinear plate theory, the nonlinear vibration equation of the axial motion membrane under the external excitation is deduced. The Galerkin’s method is used to discretize the vibration differential equations of the membrane, and then the state equation of the system is obtained. The state equation of the system is numerically solved by the fourth-order Runge–Kutta method. The relationship between the nonlinear vibration characteristics and the amplitude of external excitation, damping coefficient, and aspect ratio of the printing membrane is analyzed by using the time histories, phase-plane portraits, Poincare maps, and bifurcation diagrams. Chaotic intervals and the stable working range of the moving membrane are obtained. This study provides a theoretical basis for predicting and controlling the stability of the membrane.