Transfer of the excellent intrinsic properties of individual carbon nanoparticles into real-life applications of the corresponding heat transfer fluids remains challenging. This process requires identification and quantification of the nanoparticle-liquid interface. Here, for the first time, we have determined geometry and properties of this interface by applying transmission electron cryomicroscopy (cryo-TEM). We have systematically investigated how the particle morphology of carbon-based nanomaterials affected the thermal conductivity, specific isobaric heat capacity, thermal diffusivity, density, and viscosity of ionanofluids and/or bucky gels, using a wide range of fillers, especially single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) – both with extreme values of aspect ratio (length to diameter ratio) from 150 to 11,000. Accordingly, hybrid systems composed of various carbon nanomaterials and ionic liquid, namely 1-ethyl-3-methylimidazolium thiocyanate [EMIM][SCN], were prepared and characterized. Most of the analyzed nanodispersions exhibited long-term stability even without any surfactant. Our study revealed that the thermal conductivity could be remarkably improved to the maximum values of 43.9% and 67.8% for ionanofluid and bucky gel (at 1 wt% loadings of MWCNTs and SWCNTs), respectively, compared to the pristine ionic liquid. As a result, the model proposed by Murshed and co-workers has been improved for realistic description of the concentration-dependent thermal conductivity of such hybrid systems. The obtained results undoubtedly indicate the potential of ionanofluids and bucky gels for energy management.

The paper proposes a fractional generalization of the Maxwell and Kelvin-Voigt rheological models for a description of dynamic behavior of biopolymer materials. It was found that the rheological models of Maxwell-type do not work in the case of modeling of viscoelastic solids, and the model which significantly better describes the nature of changes in rheological properties of such media is the modified fractional Kelvin-Voigt model with two built-in springpots (MFKVM2). The proposed model was used to describe the experimental data from the oscillatory and creep tests of 3% (w/v) kuzu starch pastes, and to determine the values of their rheological parameters as a function of pasting time. These parameters provide a lot of additional information about structure and viscoelastic properties of the medium in comparison to the classical analysis of dynamic curves G’ and G” and shear creep compliance J(t). It allowed for a comprehensive description of a wide range of properties of kuzu starch pastes, depending on the conditions of pasting process.

• Multi-wall CNT bundles in ionic liquids are deagglomerated and cut upon sonication. • Prolonged ultrasonication decreases thermal conductivity of ionanofluids. • Extended ultrasonication time reduces viscosity of ionanofluids.

A growing population suffering from or at high risk of developing cardiovascular diseases can benefit from rapid, precise, and readily available diagnostics. Textronics is an interdisciplinary approach for designing and manufacturing high-performance flexible electronics integrated with textiles for various applications, with electrocardiography (ECG) being the most convenient and most frequently used diagnostic technique for textronic solutions. The key challenges that still exist for textronics include expedient manufacturing, adaptation to human subjects, sustained operational stability for Holter-type data acquisition, reproducibility, and compatibility with existing solutions. The present study demonstrates conveniently paintable ECG electroconductive coatings on T-shirts woven from polyester or 70% polyamide and 30% polyester. The up to 600-μm-thick coatings encompass working electrodes of low resistivity 60 Ω sq^-1 sheathed in the insulated pathways-conjugable with a wireless, multichannel ECG recorder. Long (800 μm) multiwalled carbon nanotubes, with scalable reproducibility and purity (18 g per round of synthesis), constituted the electroactive components and were embedded into a commercially available screen-printing acrylic base. The resulting paint had a viscosity of 0.75 Pa·s at 56 s^-1 and 25 °C and was conveniently applied using a paintbrush, making this technique accessible to manufacturers. The amplified and nondigitally processed ECG signals were recorded under dry-skin conditions using a certified ECG recorder. The system enabled the collection of ECG signals from two channels, allowing the acquisition of cardiac electrical activity on six ECG leads with quality at par with medical diagnostics. Importantly, the Holter-type ECG allowed ambulatory recording for >24 h under various activities (sitting, sleeping, walking, and running) in three male participants. The ECG signal was stable for >5 cycles of washing, a level of stability not reported yet previously. The developed ECG-textronic application possesses acceptable and reproducible characteristics, making this technology a suitable candidate for further testing in clinical trials.