The accurate prediction of the state of health (SOH) is an important basis for ensuring the normal operation of the lithium-ion battery (LIB). The accurate SOH can extend the life-span, ensure safety, and improve the performance of LIBs. The charging voltage curve and incremental capacity (IC) curve of the LIB in different SOH are obtained through experiments. The location parameters of each feature point on IC curve are closely related to battery aging, to characterize the SOH of the LIB with the location of feature points. To solve the difficulty in identifying feature points due to the oscillation in solving IC curves with a traditional numerical analytic method, the piecewise polynomial fitting method is adopted to smooth IC. To discuss the law between the location change of all feature points on the IC curve and the capacity attenuation, a capacity prediction regression model is established after the dimensionality reduction of the coordinate data of feature points on the IC curve with the principal component analysis method. The proposed method can rapidly estimate the online SOH of LIBs during the charging process of electric vehicles and the results show the maximum error is 0.63AH (3.15%).
Accurately estimating the online state-of-charge (SOC) of the battery is one of the crucial issues of the battery management system. In this paper, the gas–liquid dynamics (GLD) battery model with direct temperature input is selected to model Li(NiMnCo)O2 battery. The extended Kalman Filter (EKF) algorithm is elaborated to couple the offline model and online model to achieve the goal of quickly eliminating initial errors in the online SOC estimation. An implementation of the hybrid pulse power characterization test is performed to identify the offline parameters and determine the open-circuit voltage vs. SOC curve. Apart from the standard cycles including Constant Current cycle, Federal Urban Driving Schedule cycle, Urban Dynamometer Driving Schedule cycle and Dynamic Stress Test cycle, a combined cycle is constructed for experimental validation. Furthermore, the study of the effect of sampling time on estimation accuracy and the robustness analysis of the initial value are carried out. The results demonstrate that the proposed method realizes the accurate estimation of SOC with a maximum mean absolute error at 0.50% in five working conditions and shows strong robustness against the sparse sampling and input error.
1 February 2022 in Journal of the Electrochemical Society
The state of health (SOH) of the battery module is one of the important parameters in the battery management system. Accurately grasping the SOH of the battery module can provide the basis for its detection and diagnosis. In this work, the series battery module SOH is taken as the research object. Firstly, based on the characteristics of the series battery module, a two-parameter Weibull distribution is selected as the module failure data distribution form. Secondly, linearize the reliability function of the Weibull distribution and preprocess the module failure data. The least square method is used to identify the unknown parameters of the linear equation and carry out correlation analysis and model verification. The result shows the correlation coefficient indicating that the variables X and Y are significantly correlated. The selected model is tested by the Kolmogorov-Smirnov (K–S) method, and the K-S test statistic D achieves the maximum value which is much smaller than the Dc = 0.301 obtained by checking the K-S D critical value table. In the reliability analysis, the failure data are evenly distributed on both sides of the reliability function, indicating that the selected model can well reflect the SOH transformation trend of the series battery module.