In this paper, a digital hydraulic variable control method based on multi-way valve spool displacement feedback is proposed, which combines the advantages of low cost and high reliability of the loader fixed displacement pump hydraulic system, and the distinguished energy saving effect of the loader variable pump hydraulic system. Based on the principle of hydraulic resistance, the mathematical model of flow-pressure of multi-way valve was established. Meanwhile, the theoretical structure of a valve spool suitable for digital hydraulic system was deduced. On this basis, an improvement scheme of the valve spool was proposed in combination with machining feasibility. The simulation model of multi-way valve was established, the correctness of which was verified by experiment with the significance test method, and the valve port parameters of the multi-way valve were optimized by genetic algorithm. The simulation model before and after optimization was analyzed by AMESim software. The simulation results showed that the digital hydraulic system can basically realize the function of a variable system, and the energy consumption was significantly reduced compared with the fixed displacement pump hydraulic system. The optimized valve spool structure of the digital hydraulic system had more stable load characteristics than the fixed displacement pump system and a larger speed range. The increase range accounts for about 27% of the total stroke.
1 January 2021 in Computer Systems Science and Engineering
With the development and improvement of the hydraulic steering system, the articulated steering system became the research focus of numerous domestic and foreign scholars. The full hydraulic steering system with a compact structure and ease of operation, is widely used in articulated steering mode. Furthermore, its performance can directly impact the steering sensitivity and stability. This paper studies the working principle and actual structure of the priority valve and the steering control valve, which are very important. By setting up a mathematic model, the system’s load-sensing characteristics and the impact of steering control valve bypass throttle damping on steering stability can be analyzed. The Hydraulic Components Design (HCD) model was established for the hydraulic part of this system. It is proved that the model can reflect the system’s actual properties by comparing simulation and experimental results. The dynamic model is based on its actual prototype parameters by taking the tire and ground forces into account. The steering process’s dynamic characteristics are co-simulated in the 1D+3D system model by combining AMESim and Virtual.Lab Motion. The simulation results show that the system’s load-sensing characteristics ensure the sensitivity of the steering operation, and the bypass throttle damping has significantly improved the operation stability and lowered down the cylinder pressure fluctuations. This can improve the system performance by appropriate optimization.
1 March 2016 in Advances in Mechanical Engineering
It is known that the full hydraulic braking system has excellent braking performance. As the key component of the full hydraulic braking system, the parameters of the accumulator charging valve have a significant effect on the braking performance. In this article, the key parameters of the charging valve are analyzed through the static theoretical and an Advanced Modeling Environment for performing Simulation of engineering systems (AMESim) simulation model of the dual-circuit accumulator charging valve is established based on the real structure parameters first. Second, according to the results of the dynamic simulation, the dynamic characteristics of the charging pressure, the flow rate, and the frequency of the charging valve are studied. The key parameters affecting the serial production are proposed and some technical advices for improving the performance of the full hydraulic system are provided. Finally, the theoretical analysis is validated by the simulation results. The comparison between the simulation results and the experimental results indicates that the simulated AMESim model of the charging valve is accurate and credible with the error rate inside 0.5% compared with the experimental result. Hence, the performance of the charging valve meets the request of the full hydraulic braking system exactly.
10 September 2018 in Mathematical Problems in Engineering
Due to the harsh working environment of the construction machinery, a simple distribution cannot be used to approximate the shape of the rainflow matrix. In this paper, the Weibull-normal (W-n) mixture distribution is used. The lowest Akaike information criterion (AIC) value is employed to determine the components number of the mixture. A parameter estimation method based on the idea of optimization is proposed. The method estimates parameters of the mixture by maximizing the log likelihood function (LLF) using an intelligent optimization algorithm (IOA), genetic algorithm (GA). To verify the performance of the proposed method, one of the already existing methods is applied in the simulation study and the practical case study. The fitting effects of the fitted distributions are compared by calculating the AIC and chi-square () value. It can be concluded that the proposed method is feasible and effective for parameter estimation of the mixture distribution.
12 November 2021 in Chinese Journal of Mechanical Engineering
Load-sensing steering systems for articulated loaders are prone to large pressure shocks and oscillations during steering operations, affecting the system stability. An optimized structure of the redirector with bypass damping is proposed to improve this phenomenon. In this structure, orifices and throttle grooves are added to the traditional redirector. To control the steering load and working conditions, the steering load of the loader is replaced by a pressure regulating valve. Simulation and experimental results reveal that the redirector with bypass damping has better load-sensing characteristics than the traditional redirector. The peak output pressure shock caused by the load unit step signal decreases from 6.50 to 5.64 MPa, which means the pressure oscillation of the hydraulic system is reduced by 13.4%. The pressure fluctuation time can be reduced from 2.09 to 1.6 s, with a decrease rate of 23.4%. The output pressure oscillation decays swiftly, and the smoothness of the steering operation is improved significantly.
Bionic serrated blades with three configurations for a voluteless centrifugal fan are proposed to improve the aerodynamic performance and suppress the noise, including triangular serrated blade (T-BLE), square serrated blade (S-BLE) and semi-circular serrated blade (C-BLE). The improved delayed detached eddy turbulence model and Ffowcs Williams-Hawkings acoustic model are employed to deal with the flow fields and acoustic characteristics. The models are first validated by comparing the experimental results and simulation data in terms of the aerodynamic and noise tests. Then, a comprehensive analysis of flow field characteristics and acoustic performance of a voluteless fan is conducted. Results indicate that the aerodynamic performance of serrated blades decreases due to the reduced air-exhaust area, with the T-BLE showing a 1.6% reduction. The improvement in wake flow pattern, vortex formation and separation for triangular serrations is pronounced. The serration designs significantly suppress primary tonal noise at the 13th blade passing frequency and other broadband noise. The total sound pressure levels of the T-BLE, S-BLE and C-BLE decrease by 6.27 dB, 4.06 dB and 5.14 dB, respectively. The serration structures inhibit noise generation and propagation by weakening periodic unsteady interactions between wake vortices and stationary flow. In general, the T-BLE achieves better noise reduction while maintaining the same aerodynamic performance.