Ocean color remote sensing has long been utilized as a fundamental research tool in the oceanographic investigations of coupled biological-physical processes. Despite numerous technical advances in the application of space borne ocean-viewing radiometers, host satellite platforms in a polar-orbiting configuration often render the temporal frequency of sensor data acquisition insufficient for studies of ocean processes that occur within increasingly smaller space-time scales. Whereas geostationary ocean color missions are presently the exception (GOCI) rather than the rule, this paper presents a method to convolve ocean reflectance data obtained from contemporary ocean-viewing multispectral radiometers (VIIRS, OLCI) with spectrally-limited Advanced Baseline Imager (ABI) data obtained from the GOES-R meteorological satellites. The method, Chromatic Domain Mapping (CDM), employs a colorimetry approach to visible range ocean reflectance data. The true color space is used as a frame-of-reference that is mapped by the dedicated yet temporally sparse ocean color sensors; coincident and spectrally coarse information from ABI is then used to estimate the evolution of the true color scene. The procedure results in very high resolution (~5 min) true color image sequences. Herein, example CDM applications of rapid frontal boundary evolution and feature displacement in the Gulf of Mexico are presented and future applications of this technique are discussed.

The satellite validation navy tool (SAVANT) was developed by the Naval Research Laboratory to help facilitate the assessment of the stability and accuracy of ocean color satellites, using numerous ground truth (in situ) platforms around the globe and support methods for match-up protocols. The effects of varying spatial constraints with permissive and strict protocols on match-up uncertainty are evaluated, in an attempt to establish an optimal satellite ocean color calibration and validation (cal/val) match-up protocol. This allows users to evaluate the accuracy of ocean color sensors compared to specific ground truth sites that provide continuous data. Various match-up constraints may be adjusted, allowing for varied evaluations of their effects on match-up data. The results include the following: (a) the difference between aerosol robotic network ocean color (AERONET-OC) and marine optical Buoy (MOBY) evaluations; (b) the differences across the visible spectrum for various water types; (c) spatial differences and the size of satellite area chosen for comparison; and (d) temporal differences in optically complex water. The match-up uncertainty analysis was performed using Suomi National Polar-orbiting Partnership (SNPP) Visible Infrared Imaging Radiometer Suite (VIIRS) SNPP data at the AERONET-OC sites and the MOBY site. It was found that the more permissive constraint sets allow for a higher number of match-ups and a more comprehensive representation of the conditions, while the restrictive constraints provide better statistical match-ups between in situ and satellite sensors.

Since the October 2011 launch of the VIIRS (Visible Infrared Imaging Radiometer Suite) instrument, a number of inter-sensor comparisons between VIIRS and MODIS (Moderate Resolution Imaging Spectroradiometer) radiances have been reported. Most of these comparisons are between calibrated radiances and temperatures based on observations of the two sensors from simultaneous nadir overpasses (SNO). Few comparisons between the retrieved ocean color data products, such as chlorophyll concentration, from VIIRS and MODIS data have been reported. Retrievals from measured data at large solar zenith angles and large view zenith angles are excluded from these comparison studies. In this paper, we report the inter-sensor comparisons between VIIRS and MODIS data acquired over the Chesapeake Bay and nearby areas with relatively large differences in sensor view angles. The goal for this study is to check the consistency between MODIS and VIIRS ocean color data products in order to merge the products from the two sensors. We compare total radiances (Lt) at the top of atmosphere (TOA) and the ocean color (OC) data products derived with the automatic processing system (APS) from both VIIRS and MODIS data. APS was developed at the Naval Research Laboratory, Stennis Space Center (NRL/SSC). We have found that, although there are large differences between the measured radiances (Lt) of the two sensors when the sensor zenith angle differences are significant, the mean percent differences between the retrieved normalized water-leaving radiances are about 15%. The results show that the variation in satellite view zenith angles is not a main factor affecting the retrieval of ocean color data products, i.e., the atmospheric correction routine adequately removes the view-angle dependence.

The Geostationary Ocean Color Imager (GOCI) is the first geostationary ocean color sensor in orbit that provides bio-optical properties from coastal and open waters around the Korean Peninsula at unprecedented temporal resolution. In this study, we compare the normalized water-leaving radiance (nLw) products generated by the Naval Research Laboratory Automated Processing System (APS) with those produced by the stand-alone software package, the GOCI Data Processing System (GDPS), developed by the Korean Ocean Research & Development Institute (KORDI). Both results are then compared to the nLw measured by the above water radiometer at the Ieodo site. This above-water radiometer is part of the Aerosol Robotic NETwork (AeroNET). The results indicate that the APS and GDPS processed correlates well within the same image slot where the coefficient of determination (r²) is higher than 0.84 for all the bands from 412 nm to 745 nm. The agreement between APS and the AeroNET data is higher when compared to the GDPS results. The Root-Mean-Squared-Error (RMSE) between AeroNET and APS data ranges from 0.24 [mW/(cm²srμm)] at 555 nm to 0.52 [mW/(cm²srμm)] at 412 nm while RMSE between AeroNET and GDPS data ranges from 0.47 [mW/(cm²srμm)] at 443 nm to 0.69 [mW/(cm²srμm)] at 490 nm.

An increasing number of commercial nanosatellite-based Earth-observing sensors are providing high-resolution images for much of the coastal ocean region. Traditionally, to improve the accuracy of normalized water-leaving radiance ($n{L}_w$) estimates, sensor gains are computed using in-orbit vicarious calibration methods. The initial series of Planet nanosatellite sensors were primarily designed for land applications and are missing a second near-infrared band, which is typically used in selecting aerosol models for atmospheric correction over oceanographic regions. This study focuses on the vicarious calibration of Planet sensors and the duplication of its red band for use in both the aerosol model selection process and as input to bio-optical ocean product algorithms. Error measurements show the calibration performed well at the Marine Optical Buoy location near Lanai, Hawaii. Further validation was performed using in situ data from the Aerosol Robotic Network—Ocean Color platform in the northern Adriatic Sea. Bio-optical ocean color products were generated and compared with products from the Visual Infrared Imaging Radiometric Suite sensor. This approach for sensor gain generation and usage proved effective in increasing the accuracy of $n{L}_w$ measurements for bio-optical ocean product algorithms.

Here we present a machine-learning-based method for utilizing traditional ocean-viewing satellites to perform automated atmospheric correction of nanosatellite data. These sensor convolution techniques are required because nanosatellites do not usually possess the wavelength combinations required to atmospherically correct upwelling radiance data for oceanographic applications; however, nanosatellites do provide superior ground-viewing spatial resolution (~3 m). Coincident multispectral data from the Suomi National Polar-Orbiting Partnership Visible Infrared Imaging Radiometer Suite (Suomi NPP VIIRS; referred to herein as “VIIRS”) were used to remove atmospheric contamination at each of the nanosatellite’s visible wavelengths to yield an estimate of spectral water-leaving radiance [L_w(l)], which is the basis for surface ocean optical products. Machine learning (ML) algorithms (KNN, decision tree regressors) were applied to determine relationships between L_w and top-of-atmosphere (L_t)/Rayleigh (L_r) radiances within VIIRS training data, and then applied to test cases for (1) the Marine Optical Buoy (MOBY) in Hawaii and (2) the AErosol RObotic Network Ocean Color (AERONET-OC), Venice, Italy. For the test cases examined, ML-based methods appeared to improve statistical results when compared to alternative dark spectrum fitting (DSF) methods. The results suggest that ML-based sensor convolution techniques offer a viable path forward for the oceanographic application of nanosatellite data streams.