Quasi-brittleness is an important factor affecting the size effect of concrete, and the addition of steel fiber can effectively change this effect in concrete. The size effect on the fracture energy of steel fiber reinforced high-strength concrete was investigated in this paper. A total of 156 concrete single-edge notched beams (SENB) of various span-to-depth ratios, crack-to-depth ratios and steel fiber contents were tested to study the size effect of fracture energy of the high-strength concrete added steel fibers. The parameters of fracture in the boundary effect model (BEM) and size effect law (SEL) were deeply analyzed. The results show that the addition of steel fiber will generate significant influence on the parameter values obtained from both BEM and SEL. Based on the BEM, the relationship among Gf (experimental test fracture energy), gf (local fracture energy), and GF (fracture energy unaffected by specimen boundary) could be obtained. Thus, a method for analyzing the influence of steel fiber on GF was proposed using small-size SENB specimens at laboratory. In addition, based on the SEL, the impact of size effect on the fracture energy was effectively mitigated by the addition of steel fibers in high-strength concrete to a certain extent.
17 April 2024 in Journal of Wuhan University of Technology-Mater. Sci. Ed.
The reinforcement technique of near-surface mounted?NSM?prestressed helical rib steel wire (PHRSW) with wide raw material sources, lower in price and high application value can significantly enhance the flexural behavior of reinforced-concrete (RC) structures. Based on 8 flexural RC beams reinforced with NSM PHRSW, performance of test beams under different groove widths (10 mm, 15 mm and 20 mm) and concrete strengths (C30 and C40) was analyzed, including load-deflection, ductility, flexural capacity, strain of longitudinal steel bar and HRSW, failure mode and crack propagation. The results show that the overall flexural behavior RC beams reinforced with NSM PHRSW was significantly improved. There is a good entirety bearing capacity between the longitudinal reinforcement and PHRSW of reinforced beam with suitable groove size. The comprehensive performance of reinforced beams increases first then decreases, with the increase of groove size. The higher the strength of concrete, the more significant the influence of groove size. There is an optimal match between groove width and concrete strength for RC beams reinforced with NSM PHRSW. Considering comprehensive property of reinforced beams, groove width with 15mmwas best in this research. The results can make the research of RC beams reinforced with NSM PHRSW more comprehensive and in-depth, and provide design basis for its engineering application.