In this study, a novel but simple biomimetic turbulent drag reduction topology is proposed, inspired by the special structure of shark skin. Two effective, shark skin-inspired, ribletted surfaces were designed, their topologies were optimized, and their excellent drag reduction performances were verified by large eddy simulation. The designed riblets showed higher turbulent drag reduction behavior, e.g., 21.45% at Re = 40,459, compared with other experimental and simulated reports. The effects of the riblets on the behavior of the fluid flow in pipes are discussed, as well as the mechanisms of fluid drag in turbulent flow and riblet drag reduction. Riblets of various dimensions were analyzed and the nature of fluid flow over the effective shark skin surface is illustrated. By setting up the effective ribletted surface on structure’s surface, the shark skin-inspired, biomimetic, ribletted surface effectively reduced friction resistance without external energy support. This method is therefore regarded as the most promising drag reduction technique.

In this study, the finite element method combined with the model test method are used to investigate the ultimate strength of a target ship reactor hull structure under a pure bending load. Based on the distortion similarity theory and nonlinear similarity method, a scale model of the actual ship reactor hull structure is designed and the model collapse test is conducted. The ultimate bending moment obtained by the model test is transformed to the actual ship through the similarity transformation relationship and compared with the nonlinear finite element analysis result of the actual structure. The results are consistent with each other, which indicates that the collapse characteristics of the actual ship reactor hull structure can be better forecasted using the model test results when the test model is designed based on the nonlinear similarity method and distortion similarity theory.