We critically review both microfluidic and emerging nanofluidic phase behaviour characterization methods for industrial CO 2 , oil and gas applications.
Determining gas and oil minimum miscibility pressure (MMP) plays a vital role in the enhanced oil recovery. Injecting gases above the MMP into oil reservoirs leads to a relatively high oil recovery ratio. For conventional reservoirs, the fluid bulk MMP is measured by lab techniques such as the rising bubble approach. However, for the increasingly important tight and shale reservoirs, oil is confined in nanoscale pores. Nanoscopic MMP remains largely unknown from experiments and relies heavily on theoretical predictions. To close this gap, we developed a nanofluidic device to determine the MMP down to 50 nm by measuring the fluorescence intensity change in a nanoconfined channel. CO2 and decane are used as the working fluids, with 1% fluorescent dye for characterization. At the isothermal condition, the fluorescence intensity in decane reduces with the injecting CO2 pressure increasing, and the maximum fluorescence intensity reduction at certain CO2 pressure indicates the MMP being reached. We measured and compared CO2 and decane MMP at the bulk scale (5 μm) and nanoscale (50 nm). The experimental results align well with literature data and theoretical predictions. Importantly, our nanofluidic approach provides a promising strategy to determine the nanoscopic fluid MMP and is readily applicable in assisting the enhanced tight/shale oil recovery.
Microfluidics-based liquid chromatography is based on the miniaturization of the different types of liquid chromatography (LC) systems (e.g., affinity, adsorption, size exclusion, ion exchange) on a microchip to perform on-chip separation of different types of analytes. On-chip chromatography finds applications in genomics, proteomics, biomarker discovery, and environmental analysis. Microfluidics-based chromatography has good reproducibility and small sample consumption. However, the on-chip chromatography fabrication techniques are often more challenging to perform than conventional LC column preparation. Different research groups have attempted to develop different techniques to fabricate microfluidics-based LC systems. In this review, we will summarize the recent advances in microfluidics-based chromatography.
Visualizing CO 2 -EOR dynamics: Left—schematic of CO 2 injection in reservoir pores. Right— in situ observations of oil displacement in microfluidic chips. Cross-scale effects boost miscible recovery to 100% but worsen channeling in immiscible floods.