Feng Zhang

Mr. Feng Zhang


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 December 2019 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
JLJinxiao Liu
Jinxiao Liu
WLWenxin Li
Wenxin Li
FZFeng Zhang
Feng Zhang
XZXinguo Zhang
Xinguo Zhang
Lianjun ChenLianjun Chen
Lianjun Chen
YLYongle Liu
Yongle Liu
The low early strength of materials for paste filling in mines caused by low early strength of composite cementing material has been a severe issue. In this study, the effects of sulphoaluminate cement and gypsum on strengths of composite cementing material were investigated experimentally by employing the constrained formulation uniform design. With the content of the sulphoaluminate cement below 14% and the content of the gypsum below 16%, the compressive strengths of composite cementing materials increased, especially early strength. However, the initial and final setting time does not meet the engineering requirements in this case. Optimization tests of composite additives demonstrated that H2BO3(0.3%) + Na2SO4(0.1%) and H2BO3(0.3%) + NaNO2(0.1%) were ideal setting retarding and early strengthening composite additives as they can both reduce the initial and final setting time and enhance compressive strengths of composite cementing material. Investigations by XRD and SEM revealed that the hydration products of composite cementing material were dominated by AFt (ettringite) at the early stage and by C-S-H (hydrated calcium silicate) gel + CH (calcium hydroxide) gel at the middle and late stages. The hydration products of ratio-optimized composite cementing material do not restrain each other due to the generation sequence. Instead, they grew interactively and were coupled, thus facilitating the growth of the hardened body. This study can provide references for optimization of composite cementing material for paste filling in coal mines.

31 January 2021 in Geofluids
Verified
Journal Article
Open access
PDF file
FZFeng Zhang
Feng Zhang
JLJinxiao Liu
Jinxiao Liu
HNHaiming Ni
Haiming Ni
WLWenxin Li
Wenxin Li
YLYongle Liu
Yongle Liu
In coal mine paste filling technology, geomaterials like coal gangue and fly ash are used as the main component, and cement is applied as the cementing material. In the mining production, mining-and-filling is a cyclic work, where the filling immediately after mining and mining immediately after filling. Long solidification time after filling will affect mining; consequently, the paste should have early strength. In addition, the prepared paste will be conveyed to goaf through the pipeline. The paste flow characteristics will change to some extent in the conveying process, and there is uncertainty about whether the paste can meet the requirements of pumpability and strength. Therefore, the influence of pipeline conveying on flow characteristics of paste before filling the goaf should be taken into consideration. Based on the above two points, this paper studies the paste strength, backfill strength, and pumpability parameters in coal mine paste filling and determines the early and later strength of coal mine paste, as well as the pumpability parameters such as slump degree, segregation degree, setting time, and paste gradation. With the determined mass proportion of coal gangue, fly ash, and silicate cement, the orthogonal test was carried out with three factors including gypsum content, the content of early strength agent (Na2SO4), and the mass concentration, and at three levels. The factors affecting paste flow characteristics were determined by range analysis, and the factors affecting the pastes early strength were determined by the XRD test and SEM test on its microstructure. With paste proportioning and pipeline conveying simulation system, taking slump, segregation degree, backfill strength, and other parameters as indicators, we obtain the influence law of pipeline conveying on the flow characteristics of paste. The research has great theoretical and practical significance for developing coal paste with early strength and its flow characteristics.

9 May 2025 in Processes
Verified
Journal Article
Open access
PDF file
FZFeng Zhang
Feng Zhang
SNShiwei Niu
Shiwei Niu
JHJiawei He
Jiawei He
KZKai Zhang
Kai Zhang
ZQZhongcheng Qin
Zhongcheng Qin
As people pay increasing attention to the clean and efficient mining and utilization of coal resources, efforts to improve the utilization rate of coal, modify coal resources, and carry out coal gasification have become more and more important. The deformation characteristics of lignite, the most appropriate coal type for underground coal gasification, are intricately linked to its mechanical properties, permeability characteristics, and mining efficiency throughout the extraction process. The deformation and pore structure characteristics of lignite from room temperature to 650 °C have been studied through high-temperature triaxial penetration testing systems, NMR, and X-CT. As the temperature increases, the porosity of lignite rises, its mechanical strength decreases, and significant deformation occurs, and high temperatures promote pore development in lignite. The axial deformation of lignite pyrolysis is divided into three stages: the dehydration and degassing at room temperature to ~200 °C, the slow deformation between 200 °C and 300 °C, and the pyrolysis deformation from 300 °C to 650 °C. Significant deformation occurs during both the dehydration degassing and pyrolysis deformation stages. Between 250 °C and 650 °C, a large number of highly interconnected pore networks form. Investigating the deformation and pore structure characteristics of lignite is crucial for elucidating its mechanical and permeability features under varying temperature and pressure conditions.

28 January 2021 in Geotechnical and Geological Engineering
Verified
Journal Article
Closed access
PDF file
FZFeng Zhang
Feng Zhang
JLJinxiao Liu
Jinxiao Liu
XZXu Zhang
Xu Zhang
HNHaiming Ni
Haiming Ni
YLYongle Liu
Yongle Liu

17 March 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZQZhongcheng Qin
Zhongcheng Qin
YLYongle Liu
Yongle Liu
FZFeng Zhang
Feng Zhang
NLNan Liu
Nan Liu
This study aims to comprehensively analyze the stability of rock mass around the gob side driving roadway in a significant inclined mining face. By considering the geological parameters and engineering conditions of specific cases, we carefully explored many factors affecting the stability of the surrounding rock mass, such as the mechanical properties of rocks, formation inclination, and the existence of goaf. Based on this, we construct a numerical model for analyzing the stability of the rock mass around the gob side driving roadway. Subsequently, we made a detailed investigation of the stress distribution and the characteristics of the plastic zone. In addition, through the analysis of the destruction mode and stress distribution characteristics of the rock mass, we establish the appropriate width of the coal pillar and thus provide a scientific basis for the formulation of support countermeasures; finally, the support countermeasures proposed in this study have achieved remarkable results in practical application and verify the feasibility and practicability of the research method. This support scheme ensures the stability of the gob side entry over its service life. It is hoped that this scheme can be promoted in similar projects to help maintain mine safety.

1 January 2021 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
ZYZengde Yin
Zengde Yin
JLJinxiao Liu
Jinxiao Liu
WSWenbin Sun
Wenbin Sun
KGKebao Guo
Kebao Guo
FZFeng Zhang
Feng Zhang
Weak impact occurs during roadway excavation in some extremely thick coal seams in China. Although this hazard is not enough to destroy the roadway, it will cause fracturing and large deformation of the roadway surrounding rock, resulting in the fracturing of bolts and anchor cables and bringing great difficulties to roadway support. In the hope of solving this problem, firstly, the reason for impact occurrence in the roadway of the extremely thick coal seam is analyzed from the perspective of energy. Then, the surrounding rock fracture evolution in such a roadway is explored by means of numerical simulation, microseism, and borehole observation. Furthermore, the “pressure relief and yielding support” joint prevention and control technology is proposed and applied to Yili No. 1 Coal Mine. The field engineering application results show that the joint prevention and control technology can effectively reduce the impact energy and ensure the stability of the roadway surrounding rock in the extremely thick coal seam. The research findings can provide a theoretical foundation for the roadway support of the same type.