Metallic interconnects represent the main component of a solid oxide fuel cell (SOFC) stack in terms of weight and volume. They are typically made of ferritic stainless steel (FSS) coated on the air side. At the stack operating conditions, the interconnect is exposed to a dual atmosphere: air at the cathode side; fuel (a hydrogen-rich mixture) at the anode side. The stacks considered in this study were field operated in reformed natural gas for 5000, 9000 and 20,000 h respectively. The analyzed interconnects are made from CROFER22APU and coated on the air side with Co-Mn base spinel. One interconnect has been studied for each stack by sampling and preparing cross section the inlet and outlet positions. The samples were characterized by SEM-EDXS in order to investigate the evolution of the interconnect at the air side. The interaction between the metal substrate and the coating is investigated highlighting the formation of chromia based thermal grown oxide (at the FSS/coating interface) and the solid-state diffusion of Cr and Fe from the metal into the coating. The microstructural features evolving as a function of time are also quantified.

Two commercial ferritic stainless steels (FSSs), referred to as Steel A and Steel B, designed for specific high-temperature applications, were tested in static air for 2000 h at 750 °C to evaluate their potential as base materials for interconnects (ICs) in Intermediate Temperature Solid Oxide Fuel Cell stacks (IT-SOFCs). Their oxidation behavior was studied through weight gain and Area Specific Resistance (ASR) measurements. Additionally, the oxide scales developed on their surfaces were characterized by X-ray Diffraction (XRD), Micro-Raman Spectroscopy (μ-RS), Scanning Electron Microscopy, and Energy Dispersive X-ray Fluorescence Spectroscopy (SEM-EDS). The evolution of oxide composition, structure, and electrical conductivity in response to aging was determined. Comparing the results with those on AISI 441 FSS, steels A and B showed a comparable weight gain but higher ASR values that are required by the application. According to the authors, Steel A and B compositions need an adjustment (i.e., a plain substitution of the elements which form insulant oxides or a marginal modification in their content) to form a thermally grown oxide (TGO) with the acceptable ASR level.