Mohammad  Heidarnejad

Dr. Mohammad Heidarnejad


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2020 in Water Science
Verified
Journal Article
Open access
RGRezvan Ghanbari
Rezvan Ghanbari
MMohammad Heidarnejad
Mohammad Heidarnejad
Piano key weir is a new type of spillways designed to improve the discharge capacity of dams. Generally, increasing the upstream hydraulic load in piano key weirs results in reduced discharge capacity of the weir. Accordingly, the present study investigated the effects of triangular notch on the discharge coefficient of piano key weirs. The 3D flow field over the piano key weirs was simulated in FLOW-3D software in order to study the flow hydraulics and compare the discharge rates, and the effect of each model on the flow field over the weirs and discharge coefficient was investigated. The results suggested that data of the numerical model were appropriately consistent with that of the laboratory model. According to the results, the discharge coefficient of the triangular piano key weirs was 25% higher than that of the rectangular piano key weirs. It was also observed that changing the notch shape of the piano key weir increased the discharge coefficient of the piano key weir by 36% and 13% for the heights of 5 cm of 7.5 cm, respectively.

11 October 2018 in Flow Measurement and Instrumentation
Verified
Journal Article
Closed access
RMReza Monjezi
Reza Monjezi
MMohammad Heidarnejad
Mohammad Heidarnejad
AMAlireza Masjedi
Alireza Masjedi
MPMohammad Hosein Purmohammadi
Mohammad Hosein Purmohammadi
AKAmirabbas Kamanbedast
Amirabbas Kamanbedast

1 August 2017 in Engineering Science and Technology, an International Journal
Verified
Journal Article
Open access
NKNegin Karimi
Negin Karimi
MMohammad Heidarnejad
Mohammad Heidarnejad
AMAlireaza Masjedi
Alireaza Masjedi
Scouring threatens the stability of hydraulic structures in different ways, mostly through erosion. This study aims to examine the effect of bridge pier inclination angle on the scouring process by conducting tests along a straight channel in a Plexiglas laboratory flume. To this end, cylindrical piers with four different inclination angles were placed in the flume along a straight channel and tests were conducted at four different flow rates under clear water conditions. Evenly graded sand (D50 = 1.46 mm) was used as flume bed material. The obtained results showed that the maximum and minimum scouring depths occurred at pier angles of 0 and 15 respectively. Similar to the scoured depth, dimensions of the scoured hole decreased with increasing pier angle (i.e., changing the pier orientation with respect to the flow direction)

1 March 2020 in Ain Shams Engineering Journal
Verified
Journal Article
Open access
MSMohammad Taghi Serajian
Mohammad Taghi Serajian
AKAmir Abbas Kamanbedast
Amir Abbas Kamanbedast
AMAlireza Masjedi
Alireza Masjedi
MMohammad Heidarnejad
Mohammad Heidarnejad
HHHooshang Hasonizadeh
Hooshang Hasonizadeh

23 August 2024 in Results in Engineering
Verified
Journal Article
Open access
ANAli Niknam
Ali Niknam
MMohammad Heidarnejad
Mohammad Heidarnejad
AMAlireza Masjedi
Alireza Masjedi
ABAmin Bordbar
Amin Bordbar

10 May 2023 in Water Science
Verified
Journal Article
Open access
GAGhasem Aghashirmohammadi
Ghasem Aghashirmohammadi
MMohammad Heidarnejad
Mohammad Heidarnejad
MPMohammad Hossein Purmohammadi
Mohammad Hossein Purmohammadi
AMAlireza Masjedi
Alireza Masjedi
Nonlinear weirs are among the major structures used in water transfer. Thus, these structures have been the subject of various studies. This study investigates the effect of flow splitters on discharge performance of trapezoidal and triangular labyrinth weirs of one cycle. This study delves into the effects of flow splitters installed on the crest of trapezoidal and trapezoidal one-cycle labyrinth weirs using numerical methods (Flow-3D) and physical models. In the physical model, two, four, or six vanes were placed on the crest at regular intervals. The results showed that the triangular weir offered 4% higher efficiency than its trapezoidal counterpart and that the vanes had better effects on the trapezoidal weir. The vanes can improve the weir efficiency by up to 11%, and the discharge coefficient was found to be 10.2% higher in the numerical simulation than in the physical model.