The use of recycled asphalt pavement (RAP) materials in asphalt concrete pavements (ACP) brings significant cost and environmental benefits. In practice, however, the amount of RAP readily available far exceeds the amount being utilized in ACPs, which still leaves the problem of excess RAP in the environment partially solved. Additionally, ACPs containing RAP materials (i.e., RAP-ACPs) can still be landfilled after they have reached the end of their useful life, which may restore the original environmental waste problem. To address these, researchers have demonstrated different ways to maximize the application of RAP in ACPs. Among them, the use of RAP in pavement preventive maintenance (PPM) treatments and the repeated recycling of RAP-ACPs (i.e., RnAP) are specifically discussed in this review. It is envisaged that, by promoting these two practices, the application and benefits of RAP can be further maximized to improve sustainability. This review also discusses the long-term behavior of RAP-ACP, which is crucial to inspire confidence in the wider application of RAP in ACP. Studies on RAP-PPM have shown that virgin PPM treatments can successfully accommodate RAP materials by adjusting their mix design. So far, research on RnAP has been limited to how multiple-recycling affects the performance properties of the blends, showing improvements in rutting resistance and moisture susceptibility but little effect on linear viscoelasticity and cracking. Overall, the lack of sufficient research is considered to be the biggest challenge in facilitating the implementation of these two sustainable RAP technologies. Little or nothing is known about the bonding mechanisms between RAP and fresh PPM binders, the molecular and chemical changes in RnAP binders, or the functional performance characteristics, actual pavement performance, and long-term performance of both RAP-PPM and RnAP blends. An understanding of these aspects is very relevant to maximize and continue the beneficial reuse of RAP in ACPs while safeguarding human and environmental health.
1 July 2018 in Construction and Building Materials
Pavement preventive maintenance (PPM) is critical to ensuring traffic efficiency, road user experience, and safety. However, it imposes significant costs in annual road infrastructure budgets because it requires high-quality and natural material resources. This study provides a systematic and comprehensive review on the use of recycled wastes as an alternative for the natural materials used in PPM mixes. Specifically, the use of recycled waste tires (RWT) and reclaimed asphalt pavement (RAP) in chip seals, microsurfacing, slurry seals, and thin asphalt overlays were discussed. The current state-of-practice in terms of material specification and mix design were comprehensively investigated for PPM mixes containing RAP (RAP-PPM) and PPM with RWT (RWT-PPM). Laboratory and field performances of waste-treated PPM mixes were elaborated and compared with conventional PPM treatments to determine the feasibility of the RAP-PPM and RWT-PPM technologies. Furthermore, current research gaps were identified, and prospects for future investigations were discussed. It is envisaged that this study can provide a sufficient theoretical basis for the widespread practical application and beneficial use of this valuable technology, towards promoting sustainability in pavement maintenance practice.
Aeolian sand is an important construction material in many desert regions. In order to study its engineering properties, samples were extracted from two sections within Yulin city, Shaanxi province of China. One set was collected from a site along the G210 highway that connects Yulin city and Inner Mongolia, and the other sampling site was along the provincial highway S204 that connects Yulin and Jingbian city. Sieve analyses using square mesh and round mesh sieves were conducted to determine the particle size distribution of the collected sand samples. In addition, scanning electron microscopy (SEM) and X‐ray diffraction (XRD) were used to characterize the surface microstructure and mineral composition of the sand particles, respectively. Based on the sieve analyses results, the size distribution of the Aeolian sand particles in this region is mainly between 0.075 mm and 0.3 mm with low clay content (0.69–10.3%). Also, it was found that the square mesh is more effective than the round mesh for conducting sieve analysis of Aeolian sand, with the 0.15 mm sieve identified as the key sieve size. Using the percentage passing rates in the 0.15 mm square sieve as a classification index, the particle gradation of the sand particles was simplified into three classes: Class A (less than 30%), Class B (between 30% and 60%), and Class C (more than 60%). SEM observation revealed different profile configurations on the surfaces of the Aeolian sand particles including intensive pitting, corrosion marks, and cracks, while the XRD results indicated the presence of quartz and feldspar in more than 95% of the entire mineral composition of the sand particles. Minerals that are deleterious to cement and mortar used in road construction were present in negligible amounts. From the particle size characterization, it is possible to use Aeolian sand as a subgrade material in road construction due its lower clay content. Also, the negligible amount of minerals such as calcite and chlorite in the Aeolian sand mineral composition indicates its potential for use in cement and mortar without causing any complex chemical reactions. The findings of this study indicate the possibility of utilizing the Aeolian sand deposits in Yulin area as a road construction material and also provide a theoretical guide to encourage its widespread application in this regard.
20 June 2025 in Construction and Building Materials