The refining of heavy crude oil was carried using newly assembled integrated distillation column. The refining specification of Antan crude oils fall outside the optimal processing range, necessitating quality adjustments to align with standard refining parameters. This is because the crude oil is viscosity, with low API gravity, high sulphur content and associated significant residue during industrial refining in the current refineries in Nigeria, to minimizes the thermal degradation of this heavy residues, and maximizes the yield of valuable materials, twelve different blending ratios of Antan crude with Oso condensate was prepared and refined in the unified operation of the distillation process. This process employs thermal integration, simplified heat recovery, and unified operation to break down complex heavy hydrocarbons into simpler, lighter molecules. Fractionation is guided by verified boiling ranges: 36–170°C for naphtha, 170–240°C for kerosene, and 240–305°C for diesel. Optimization of the Antan blend using the Bespoke-Beckenham Design (BBD) experimental method achieved fuel distillate yields of 35.40% naphtha, 24.10% kerosene, and 21.20% diesel, while slashing residuum to 18.40% thus, an improvement over conventional distillation in Nigerian refineries, which often yields 45.50% residuum by volume. BBD enhancements included approximately 10% for naphtha, 8.73% for kerosene, and 8.71% for diesel, as predicted by Response Surface Methodology (RSM) analysis. However, obtained 40:60 blend confirms compliance with Nigerian refining standards, with a specific gravity falling within the refining specification (0.84–0.86). Analysis incorporates true boiling point (TBP) curves to delineate fraction cuts, refine reactions, and forecast blended fraction properties.