Plastic flow is never a continuous process either in time or in space, yet it continues to be modelled in this way. In this review, plasticity is discussed from the perspective of self-organised criticality (SOC). The following topics are discussed: slip bands and models for them; how crystallographic is slip?; distributed sources and collective motion of dislocations; the triumph and the failure of the Taylor model; long range stress does not contribute directly to the flow stress, so the forest rules; the perils of coarse-graining and the relationship between smoothed engineering variables and intermittently fluctuating physical variables; work-hardening of a slip band; what controls the structure of slip bands?; interpretation of precursor and exhaustion phases; relationship to other recent theories; consequences which follow from a sound theory of plastic flow. Brief appendices present algebraic results for slip bands modelled as ellipsoids.
In response to a recent paper by Mughrabi and Pschenitzka (Phil. Mag. 85 3029 (2005).), an estimate is given of the saturation stress in cyclic plasticity, assuming only the bowing of screw dislocations and the simultaneous passing of them at a critical separation determined by their cross-section for mutual annihilation by cross-slip. Although, as Mughrabi and Pschenitzka show, the simple addition of the two stresses is a poor approximation, if the bowing stress is made equal to the passing stress, the equations governing the saturation stress and the associated average plastic strain in a persistent slip band are scarcely altered from earlier work (Phil. Mag. 84 2501 (2004).). A comparison between theory and experiment shows good quantitative agreement. Finally, an estimate is made of the alternating internal stress in a band, and reasons suggested for why it does not contribute to the saturation stress.
Starting from the idea that plastic flow produces dislocation structures in a state of self-organised criticality, it is shown that one expects power-law relationships between variables. If slip bands are modelled as avalanches of shear with an ellipsoidal shape, slightly tilted from the crystallographic slip plane, limited in size by interaction with secondary slip, the observed exponents of the power laws can be rationalised. In some cases, the constant of proportionality can also be estimated, and found to agree with experiment, even though the detailed mechanism of avalanche formation is not addressed. To analyse creep data and slip-band statistics, it is further assumed that the role of cross-slip is to eliminate screw dislocation dipoles, removing them entirely at stresses found in Stage III of work-hardening. If physical constants, such as the atomic vibration frequency, play a role, the dimensionless power-law relationships do not apply. One then finds creep rates linear in stress and absolute temperature, proportional to the logarithm of time, obeying an equation of state, as observed.
Plastic deformation is a fundamentally important physical process, ultimately determining how materials can be used. Metal plasticity is governed by dislocation dynamics and lattice twinning. Although many continuum constitutive models exist, plasticity is now known to occur in discrete events arising from the self-organisation of dislocations into ‘avalanches’ under applied stress. Here we extend avalanche plasticity to high strain rates, by introducing time limitation to self-organisation. At high rates large avalanches fail to form; the system must self-organise around new constraints. Various macroscopic consequences include an increasing rate of work hardening with strain rate. We perform new measurements on high purity copper that distinguish between instantaneous and permanent strength contributions across a strength transition at 104 s−1, showing the transition to be a change in structural evolution. Strong model agreement validates our time limited self-organisation approach. Our work results in a unified, physically realistic framework for plasticity, with wide applicability.
The flow of material out from under regions in compression must occur by the operation of many slip systems, which together produce rotational flow. Such flow requires the accumulation of geometrically necessary dislocations, and leads to the indentation size effect: smaller indents produce higher hardness, a component of the hardness being inversely proportional to the square-root of the indenter size. A pattern of flow in polycrystals which satisfies both continuity of normal stress and continuity of matter at boundaries can be achieved by rotational flow, and it leads to a grain-size effect. Under most circumstances, the flow stress has a component which is inversely proportional to the square-root of the grain size, the Hall-Petch law. The flow is accompanied by the build-up of internal stress which can be relieved by intercrystalline cracking, thereby limiting the cohesive strength of polycrystals. The relationship between these ideas and traditional views is briefly explained, and an analysis is given of recent experimental results.