Thomas Flayols

Dr. Thomas Flayols

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 February 2020 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
FGFelix Grimminger
Felix Grimminger
AMAvadesh Meduri
Avadesh Meduri
MKMajid Khadiv
Majid Khadiv
JVJulian Viereck
Julian Viereck
MWManuel Wuthrich
Manuel Wuthrich
LRLudovic Righetti
Ludovic Righetti
We present a new open-source torque-controlled legged robot system, with a low-cost and low-complexity actuator module at its core. It consists of a high-torque brushless DC motor and a low-gear-ratio transmission suitable for impedance and force control. We also present a novel foot contact sensor suitable for legged locomotion with hard impacts. A 2.2 kg quadruped robot with a large range of motion is assembled from eight identical actuator modules and four lower legs with foot contact sensors. Leveraging standard plastic 3D printing and off-the-shelf parts results in a lightweight and inexpensive robot, allowing for rapid distribution and duplication within the research community. We systematically measure the achieved impedance at the foot in both static and dynamic scenarios, where we have measured a maximum dimensionless leg stiffness of 10.8 without active damping, which is comparable to the leg stiffness of a running human. Finally, to demonstrate the capabilities of the quadruped, we present a novel controller which combines feedforward contact forces computed from a kino-dynamic optimizer with impedance control of the center of mass and base orientation which is capable of regulating complex motions while being robust to environmental uncertainty.

1 November 2017
Verified
Conference Paper
Closed access
OSO. Stasse
O. Stasse
TFThomas Flayols
Thomas Flayols
RBR. Budhiraja
R. Budhiraja
KGK. Giraud-Esclasse
K. Giraud-Esclasse
JCJ. Carpentier
J. Carpentier
FFF. Ferro
F. Ferro
The upcoming generation of humanoid robots will have to be equipped with state-of-the-art technical features along with high industrial quality, but they should also offer the prospect of effective physical human interaction. In this paper we introduce a new humanoid robot capable of interacting with a human environment and targeting industrial applications. Limitations are outlined and used together with the feedback from the DARPA Robotics Challenge, and other teams leading the field in creating new humanoid robots. The resulting robot is able to handle weights of 6 kg with an out-stretched arm, and has powerful motors to carry out fast movements. Its kinematics have been specially designed for screwing and drilling motions. In order to make interaction with human operators possible, this robot is equipped with torque sensors to measure joint effort and high resolution encoders to measure both motor and joint positions. The humanoid robotics field has reached a stage where robustness and repeatability is the next watershed. We believe that this robot has the potential to become a powerful tool for the research community to successfully navigate this turning point, as the humanoid robot HRP-2 was in its own time.

1 November 2017
Verified
Conference Paper
Closed access
TFThomas Flayols
Thomas Flayols
APA. Del Prete
A. Del Prete
PWP. Wensing
P. Wensing
AMA. Mifsud
A. Mifsud
MBM. Benallegue
M. Benallegue
OSO. Stasse
O. Stasse
This paper introduces and evaluates a family of new simple estimators to reconstruct the pose and velocity of the floating base. The estimation of the floating-base state is a critical challenge to whole-body control methods that rely on full-state information in high-rate feedback. Although the kinematics of grounded limbs may be used to estimate the pose and velocity of the body, modelling errors from ground irregularity, foot slip, and structural flexibilities limit the utility of estimation from kinematics alone. These difficulties have motivated the development of sensor fusion methods to augment body-mounted IMUs with kinematic measurements. Existing methods often rely on extended Kalman filtering, which lack convergence guarantees and may present difficulties in tuning. This paper proposes two new simplifications to the floating-base state estimation problem that make use of robust off-the-shelf orientation estimators to bootstrap development. Experiments for in-place balance and walking with the HRP-2 show that the simplifications yield results on par with the accuracy reported in the literature for other methods. As further benefits, the structure of the proposed estimators prevents divergence of the estimates, simplifies tuning, and admits efficient computation. These benefits are envisioned to help accelerate the development of baseline estimators in future humanoids.

2 August 2018
Verified
Book Chapter
Closed access
PDF file
OSO. Stasse
O. Stasse
TFThomas Flayols
Thomas Flayols

1 October 2019
Verified
Conference Paper
Closed access
MFMederic Fourmy
Mederic Fourmy
DADinesh Atchuthan
Dinesh Atchuthan
NMNicolas Mansard
Nicolas Mansard
JSJoan Sola
Joan Sola
TFThomas Flayols
Thomas Flayols
Current locomotion algorithms in structured (in-door) 3D environments require an accurate localization. The several and diverse sensors typically embedded on legged robots (IMU, coders, vision and/or LIDARS) should make it possible if properly fused. Yet this is a difficult task due to the heterogeneity of these sensors and the real-time requirement of the control. While previous works were using staggered approaches (odometry at high frequency, sparsely corrected from vision and LIDAR localization), the recent progress in optimal estimation, in particular in visual-inertial localization, is paving the way to a holistic fusion. This paper is a contribution in this direction. We propose to quantify how a visual-inertial navigation system can accurately localize a humanoid robot in a 3D indoor environment tagged with fiducial markers. We introduce a theoretical contribution strengthening the formulation of Forster's IMU pre-integration, a practical contribution to avoid possible ambiguity raised by pose estimation of fiducial markers, and an experimental contribution on a humanoid dataset with ground truth. Our system is able to localize the robot with less than 2 cm errors once the environment is properly mapped. This would naturally extend to additional measurements corresponding to leg odometry (kinematic factors) thanks to the genericity of the proposed pre-integration algebra.

20 July 2022 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
PLPierre-Alexandre Leziart
Pierre-Alexandre Leziart
TCThomas Corberes
Thomas Corberes
TFThomas Flayols
Thomas Flayols
STSteve Tonneau
Steve Tonneau
NMNicolas Mansard
Nicolas Mansard
PSPhilippe Soueres
Philippe Soueres
This letter presents significant improvements to the nominal control architecture of the open-access Solo-12 quadruped that were done to implement and compare different centroidal Model Predictive Controllers (MPC). This work was motivated by our previous study in which various MPC schemes of increasing complexity were tested in simulation. They range from a simplified linearized model with contact points fixed by a heuristic, to a nonlinear one that also optimizes the contact points locations. We describe the developments that were necessary to implement such control schemes on the real robot while doubling its maximum velocity. Notably, to synthesize a stable whole-body controller, the inverse dynamics resolution was replaced by a mixed inverse kinematics and quadratic programming scheme. These developments enabled the successful deployments of the various centroidal MPCs on Solo-12. Experimental results show that all MPCs lead to quite similar performances with the proposed whole-body controller and, as a consequence, do not confirm the result of previous simulation study that concluded on the preeminence of the nonlinear centroidal MPC optimizing both the center of mass trajectory and the foot placements.