Shixue Liang

Prof. Dr. Shixue Liang


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 July 2022 in Engineering Failure Analysis
Verified
Journal Article
Closed access
YSYuanxie Shen
Yuanxie Shen
LWLinfeng Wu
Linfeng Wu
SLShixue Liang
Shixue Liang

14 February 2022 in Crystals
Verified
Journal Article
Open access
PDF file
YSYuanxie Shen
Yuanxie Shen
JSJunhao Sun
Junhao Sun
SLShixue Liang
Shixue Liang
Fiber reinforced polymer (FRP) serves as a prospective alternative to reinforcement in concrete slabs. However, similarly to traditional reinforced concrete slabs, FRP reinforced concrete slabs are susceptible to punching shear failure. Accounts of the insufficient consideration of impact factors, existing empirical models and design provisions for punching strength of FRP reinforced concrete slabs have some problems such as high bias and variance. This study established machine learning-based models to accurately predict the punching shear strength of FRP reinforced concrete slabs. A database of 121 groups of experimental results of FRP reinforced concrete slabs are collected from a literature review. Several machine learning algorithms, such as artificial neural network, support vector machine, decision tree, and adaptive boosting, are selected to build models and compare the performance between them. To demonstrate the predicted accuracy of machine learning, this paper also introduces 6 empirical models and design codes for comparative analysis. The comparative results demonstrate that adaptive boosting has the highest predicted precision, in which the root mean squared error, mean absolute error and coefficient of determination of which are 29.83, 23.00 and 0.99, respectively. GB 50010-2010 (2015) has the best predicted performance among these empirical models and design codes, and ACI 318-19 has the similar result. In addition, among these empirical models, the model proposed by El-Ghandour et al. (1999) has the highest predicted accuracy. According to the results obtained above, SHapley Additive exPlanation (SHAP) is adopted to illustrate the predicted process of AdaBoost. SHAP not only provides global and individual interpretations, but also carries out feature dependency analysis for each input variable. The interpretation results of the model reflect the importance and contribution of the factors that influence the punching shear strength in the machine learning model.

6 January 2023 in Materials
Verified
Journal Article
Open access
PDF file
ZFZhengyu Fei
Zhengyu Fei
SLShixue Liang
Shixue Liang
YCYiqing Cai
Yiqing Cai
YSYuanxie Shen
Yuanxie Shen
Recycled powder (RP) serves as a potential and prospective substitute for cementitious materials in concrete. The compressive strength of RP mortar is a pivotal factor affecting the mechanical properties of RP concrete. The application of machine learning (ML) approaches in the engineering problems, particularly for predicting the mechanical properties of construction materials, leads to high prediction accuracy and low experimental costs. In this study, 204 groups of RP mortar compression experimental data are collected from the literature to establish a dataset for ML, including 163 groups in the training set and 41 groups in the test set. Four ensemble ML models, namely eXtreme Gradient-Boosting (XGBoost), Random Forest (RF), Light Gradient-Boosting Machine (LightGBM) and Adaptive Boosting (AdaBoost), were selected to predict the compressive strength of RP mortar. The comparative results demonstrate that XGBoost has the highest prediction accuracy when the a10-index, MAE, RMSE and R2 of the training set are 0.926, 1.596, 2.155 and 0.950 and the a10-index, MAE, RMSE and R2 of the test set are 0.659, 3.182, 4.285 and 0.842, respectively. SHapley Additive exPlanation (SHAP) is adopted to interpret the prediction process of XGBoost and explain the influence of influencing factors on the compressive strength of RP mortar. According to the importance of influencing factors, the order is the mass replacement rate of RP, the size of RP, the kind of RP and the water binder ratio of RP. The compressive strength of RP mortar decreases with the increase in the RP mass replacement rate. The compressive strength of RBP mortar is slightly higher than that of RCP mortar. Machine learning technologies will benefit the construction industry by facilitating the rapid and cost-effective evaluation of RP material properties.

20 October 2022 in Buildings
Verified
Journal Article
Open access
PDF file
LSLulu Shen
Lulu Shen
YSYuanxie Shen
Yuanxie Shen
SLShixue Liang
Shixue Liang
Reinforced concrete slab-column structures, despite their advantages such as architectural flexibility and easy construction, are susceptible to punching shear failure. In addition, punching shear failure is a typical brittle failure, which introduces difficulties in assessing the functionality and failure probability of slab-column structures. Therefore, the prediction of punching shear resistance and corresponding reliability analysis are critical issues in the design of reinforced RC slab-column structures. In order to enhance the computational efficiency of the reliability analysis of reinforced concrete (RC) slab-column joints, a database containing 610 experimental data is used for machine learning (ML) modelling. According to the nonlinear mapping between the selected seven input variables and the punching shear resistance of slab-column joints, four ML models, such as artificial neural network (ANN), decision tree (DT), random forest (RF), and extreme gradient boosting (XGBoost) are established. With the assistance of three performance measures, such as root mean squared error (RMSE), mean absolute error (MAE), and coefficient of determination (R2), XGBoost is selected as the best prediction model; its RMSE, MAE, and R2 are 32.43, 19.51, and 0.99, respectively. Such advantages are also reflected in the comparison with the five empirical models introduced in this paper. The prediction process of XGBoost is visualized by SHapley Additive exPlanation (SHAP); the importance sorting and feature dependency plots of the input variables explain the prediction process globally. Furthermore, this paper adopts Monte Carlo simulation with a machine learning-based surrogate model (ML-MCS) to calibrate the reliability of slab-column joints in a real engineering example. A total of 1,000,000 samples were obtained through random sampling, and the reliability index β of this practical building was calculated by Monte Carlo simulation. Results demonstrate that the target reliability index requirements under design provisions can be achieved. The sensitivity analysis of stochastic variables was then conducted, and the impact of that analysis on structural reliability was deeply examined.

13 March 2023 in Journal of Building Engineering
Verified
Journal Article
Closed access
SLShixue Liang
Shixue Liang
YSYuanxie Shen
Yuanxie Shen
XGXiangling Gao
Xiangling Gao
YCYiqing Cai
Yiqing Cai
ZFZhengyu Fei
Zhengyu Fei

17 February 2022 in Buildings
Verified
Journal Article
Open access
PDF file
LWLinfeng Wu
Linfeng Wu
THTiancan Huang
Tiancan Huang
YTYili Tong
Yili Tong
SLShixue Liang
Shixue Liang
RC slab–column structures are widely used because of the advantages of small space occupation for horizontal members, easy construction and good economy. However, slab–column joints are prone to punching shear failures, which deteriorates structural safety. This paper provides an analytical model to predict the punching shear capacity of the RC slab–column joint. A database of 251 test results is established for the shear punching capacity of slab–column joints without punching shear reinforcement. The performance of existing design codes in predicting the shear resistance of slab–column joints is investigated and compared based on the database. Then, based on the modified compression field theory (MCFT) model, an equation for calculating the punching shear resistance of slab–column joints without punching shear reinforcement is established. The prediction results of the analytical model are enhanced by using the regression analysis method. The model proposed in this paper is based on both reliable theoretical and the summary of a large number of test results, which has higher prediction accuracy than the design codes.