High Strength Low Alloy (HSLA) steels are the materials of choice in pipeline construction with the API X70 grade as the steel for the majority of pipeline networks constructed during the late 20th and early this century. This paper reports on the influence of Post-Weld Heat Treatment (PWHT) on the reduction of residual stresses, resulting changes in the microstructure, and mechanical properties of a multi-pass, X70 HSLA steel, weld joints made by a combined Modified Short Arc Welding (MSAW) and Flux Cored Arc Welding (FCAW) processes. Neutron diffraction results highlighted high magnitude of tensile residual stresses, in excess of yield strength of both parent and weld metal, in the as-welded specimen (650 MPa), which were decreased substantially as a result of applying PWHT (144 MPa). Detailed microstructural studies are reported to confirm the phase transformation during PWHT and its interrelationship with mechanical properties. Transmission Electron Microscopy (TEM) analysis showed polygonization and formation of sub-grains in the PWHT specimen which justifies the reduction of residual stress in the heat-treated weld joints. Furthermore, microstructural changes due to PWHT justify the improvement in ductility (increase in the elongations) with a slight reduction in yield and tensile strength for the PWHT weld joint.
31 January 2024 in The International Journal of Advanced Manufacturing Technology
Significant residual stresses are often generated during the manufacturing of cast Al-Si alloy engine blocks due to differential cooling rates, the mismatch in the thermo-physical properties of adjacent materials in direct contact and volumetric changes caused by solid-state phase transformations during cooling. These may be modified during heat treatment and operation. These residual stresses may lead to distortion (affecting performance and economy) or premature failure of the engine block. For this reason, it is of fundamental importance to have reliable numerical and experimental methods for characterizing the residual stresses in the engine blocks at several steps during the manufacturing process. Sectioning and neutron diffraction techniques have been widely used to determine the residual stresses in the engine blocks. Numerical techniques have been developed to predict these residual stress but require experimental validation. The authors reviewed several numerical and experimental studies of residual stress evolution in engine blocks and showed how the residual stresses, microstructures, and mechanical properties are correlated.
Quenched and tempered (Q & T) steels have numerous applications, particularly in the defence industry with welding as the main fabrication route. Since welding imparts stresses due to thermal gradients development during welding, plus the fact that the Q & T fabricated structures are expected to function in a complex loading environment, it is critically important to relax the welding stresses before exposing the parts to service conditions. The present study reports on the generated residual stresses when Bisalloy 80 is welded by pulsed gas metal arc welding (GMAW-P) and verifies the effects of post-weld heat treatment (PWHT) on the microstructural changes, removal or reduction of residual stresses and the resulting mechanical properties of the welded Q & T steel joints. Neutron diffraction was utilized to measure the residual stresses in the as-welded and after PWHT of the Bisalloy 80 steel weldments. High levels of tensile residual stresses reaching to the yield strength of the weld metal were present (642 ± 24 MPa) in the as-welded joints but were substantially reduced after PWHT (145 MPa ± 21 MPa, which is ~23% of the yield strength of the weld metal). PWHT led to microstructural changes in different regions of the parent and weld metals, including the formation of coarsened polygonal ferrite grains and bainitic ferrite laths. This finding is in line with hardness measurements, where hardness reductions were evident in the heat-affected zone (HAZ) and the weld metal (WM) of the heat-treated specimens.