Maria Mavroulidou

Prof. Dr. Maria Mavroulidou

Built Environment and Architecture / Civil and Building Services Engineering; London south bank university

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 December 2018 in Journal of Material Cycles and Waste Management
Verified
Journal Article
Open access
PDF file
Maria MavroulidouMaria Mavroulidou
Maria Mavroulidou
DLDavid Lawrence
David Lawrence
Foundry sand (FS) waste creates a serious solid waste management problem worldwide due to the high volumes produced, necessitating alternatives to landfilling. A possible route is its use in concrete; however, the current consensus is that FS can only be used for modest sand replacements, based mostly on evidence on concrete with clay-bound FS (greensand). Conversely, this study assessed salient properties of structural concrete with chemically bound FS (polymeric resin binder), for which there is very little information. Concrete mixes were prepared in which FS replaced regular concrete sand partially or fully. The results showed that unlike greensand, the tested chemically bound FS could replace regular concrete sand fully, giving highly workable mixes with good mechanical properties (compressive, splitting and flexural strengths and static modulus of elasticity) similar to those of mixes with regular concrete sand; the effect of FS content on these properties was not statistically significant. Durability in terms of water absorption, carbonation and alkali–silica reaction tests was not adversely affected. The possibility of using high contents of this type of FS in concrete (as opposed to greensand) gives promise for an additional outlet route for large quantities of this waste material with clear economic and environmental benefits.

27 January 2017 in Waste and Biomass Valorization
Verified
Journal Article
Open access
PDF file
Maria MavroulidouMaria Mavroulidou
Maria Mavroulidou
Copper slag is a voluminous waste material obtained during the manufacturing of copper (matte smelting process). As its disposal becomes a concern for environmental protection agencies and governments, possible alternative outlets for this waste material are needed. The paper presents a laboratory study on CEM-II concrete mixes, containing water-cooled copper slag waste material for a partial or full replacement of fine concrete aggregate. A series of tests were performed at two different water to cement ratios, to determine the workability, cube compressive strength, indirect tensile strength, static modulus of elasticity, and a number of durability-related characteristics (water absorption, accelerated corrosion, carbonation, alkali-silica reaction). The results showed that water-cooled copper slag had variable effects on the resulting fresh or hardened concrete properties, depending on the sand replacement level and water to cement ratio. However the measured strength values were likely to be linked to the usual variability of concrete batches, rather than a significant effect of the copper slag aggregate. This hypothesis was further supported by statistical analysis. Concerning the durability related characteristics, the overall performance of the concrete containing copper-slag was in most cases similar or better than that of normal concrete with natural sand aggregate. Based on the results water-cooled copper slag can therefore be considered to be a suitable fine aggregate for concrete. This shows promise for developing an additional viable solution to tackle the issue of copper slag waste.

27 January 2016 in Acta Geotechnica
Verified
Journal Article
Open access
PDF file
Xiwei ZhangXiwei Zhang
Xiwei Zhang
Maria MavroulidouMaria Mavroulidou
Maria Mavroulidou
MGMichael J. Gunn
Michael J. Gunn
This paper investigates the drying and wetting soil water retention curves (SWRCs) of statically compacted lime-stabilised London Clay specimens. A series of tests were performed using the contact filter paper method, pressure plate apparatus and a suction-controlled triaxial system incorporating the axis translation technique. These investigated the water retention of the soil under different boundary and stress-state conditions and simultaneously determined the volume change in the soil during drying and wetting. Factors relevant to the lime treatment of soils, such as curing period and method (air vs. water curing), were also considered. Finally, the hysteresis of the SWRC of the chemically treated soil (for which there appears to be a lack of information in the international literature) was investigated. The results showed that the treatment with lime increased the volumetric stability but reduced the water retention ability due to a more open structure enabled by the flocculation and chemical bonding effects. Curing period and method effect appears to be small. Hysteresis was noted to some degree in all instances.

29 September 2023 in Environmental Processes
Verified
Journal Article
Open access
PDF file
WMWilson Mwandira
Wilson Mwandira
Maria MavroulidouMaria Mavroulidou
Maria Mavroulidou
MGMichael J. Gunn
Michael J. Gunn
DPDiane Purchase
Diane Purchase
HGHemda Garelick
Hemda Garelick
JGJonathan Garelick
Jonathan Garelick
Biocementation, i.e., the production of biomimetic cement through the metabolic activity of microorganisms, offers exciting new prospects for various civil and environmental engineering applications. This paper presents a systematic literature review on a biocementation pathway, which uses the carbonic anhydrase (CA) activity of microorganisms that sequester CO2 to produce biocement. The aim is the future development of this technique for civil and (geo-)environmental engineering applications towards CO2-neutral or negative processes. After screening 248 potentially relevant peer-reviewed journal papers published between 2002 and 2023, 38 publications studying CA-biocementation were considered in the review. Some of these studies used pure CA enzyme rather than bacteria-produced CA. Of these studies, 7 used biocementation for self-healing concrete, 6 for CO2 sequestration, 10 for geotechnical applications, and 15 for (geo-)environmental applications. A total of 34 bacterial strains were studied, and optimal conditions for their growth and enzymatic activity were identified. The review concluded that the topic is little researched; more studies are required both in the laboratory and field (particularly long-term field experiments, which are totally lacking). No studies on the numerical modelling of CA-biocementation and the required kinetic parameters were found. The paper thus consulted the more widely researched field of CO2 sequestration using the CA-pathway, to identify other microorganisms recommended for further research and reaction kinetic parameters for numerical modelling. Finally, challenges to be addressed and future research needs were discussed.

15 October 2018 in Waste Management & Research: The Journal for a Sustainable Circular Economy
Verified
Journal Article
Closed access
Maria MavroulidouMaria Mavroulidou
Maria Mavroulidou
Chemical ground improvement of soils of poor quality for construction has been increasingly used as a means of promoting sustainable construction practices. The production of conventional soil stabilisers such as cement or lime involves non-renewable natural resource and energy consumption and high carbon dioxide emissions; therefore, alternative stabilisers are sought. This study used waste paper sludge ash (PSA) to treat three different clays. The aim was to assess PSA effectiveness as an alternative to lime or cement for clay stabilisation based on plasticity characteristics, unconfined compressive strength (UCS), water retention and volumetric stability. PSA-treated soil specimens were shown to perform well compared to lime-treated or cement-treated ones: (a) PSA considerably lowered the plasticity indices of the two expansive clays, in a similar way as lime; (b) in most cases PSA dosages equal to or greater than the initial consumption of lime gave UCS at least twice as high compared to those obtained using commercial limes at equivalent dosages (> 1 MPa for the two expansive soils after 7 or 28 days of curing) and in the inspected cases also higher UCS than cement; and (c) consistently with the plasticity results PSA-treated specimens swelled less during wetting and had lower volumetric strains upon drying (better volumetric stability) compared to lime-treated or cement-treated soils. Overall the results give promise for a valorisation route of this waste material in the field of ground improvement.

3 February 2021 in Waste Management & Research: The Journal for a Sustainable Circular Economy
Verified
Journal Article
Open access
PDF file
Maria MavroulidouMaria Mavroulidou
Maria Mavroulidou
SSShamil Shah
Shamil Shah
Pulp and paper manufacturing and recycling industries are a resource-intensive sector, generating 25–40% of the annual municipal solid waste worldwide. Waste includes abundant volumes of paper sludge, as well as the product of its incineration, namely paper sludge ash. These two waste materials are both predominantly landfilled. There is thus a drive for additional valorisation routes for these materials. This short communication focuses on the potential use of paper sludge ash in alkali-activated cement concrete; this type of concrete was estimated to potentially reduce CO2 emissions by up to 5–6 times, while it can also incorporate waste materials or industrial by-products in its composition. The paper presents a laboratory study assessing the feasibility of structural alkali-activated cement concrete with ground granulated blastfurnace slag (a by-product of steel production) and paper sludge ash. Paper sludge ash is used mainly as a source of Ca(OH)2 in the alkaline activator solution, and secondly as an additional source of aluminosilicates. A number of factors potentially affecting the activation process and the resulting concrete quality were investigated, including different dosage of activators, curing conditions and curing time. Mixes with paper sludge ash in the activator system developed high early concrete strengths at ambient temperatures and maintained adequate strengths for structural concrete. Further mix optimisation and mechanical and durability testing, accompanied by material characterisation, are required to establish the advantages of using this waste material in structural alkali-activated cement concrete.