Boris Vasilyev

Dr. Boris Vasilyev

CIAM

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 June 2016
Verified
Conference Paper
Closed access
PDF file
LMLiubov Magerramova
Liubov Magerramova
BVBoris Vasilyev
Boris Vasilyev
VKVladimir Kinzburskiy
Vladimir Kinzburskiy
Improving engine performance requires creating new materials and improving design and manufacturing. Additive Manufacturing (AM) is advancing rapidly and allows us to produce details of complex shapes that cannot be produced by traditional methods. The goal of this study was to demonstrate the possibility of using AM for the manufacture of turbine blades with a complex geometry, including those with advanced cooling systems, which cannot be manufactured by conventional methods. This paper presents the results of the design and calculations of high-pressure turbine (HPT) cooled blades, as well as a low-pressure turbine (LPT) uncooled blade that was designed using topology optimization (TO). Several blades were manufactured using AM. 3D tomography test results for those blades confirm the possibility of AM application in production of blades with complex geometry.

29 November 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
BVBoris Vasilyev
Boris Vasilyev
SNSergei Nikolaev
Sergei Nikolaev
Michael RaevskyMichael Raevsky
Michael Raevsky
SBSergei Belov
Sergei Belov
IUIghor Uzhinsky
Ighor Uzhinsky
Blade damage accounts for a substantial part of all failure events occurring at gas-turbine-engine power plants. Current operation and maintenance (O&M) practices typically use preventive maintenance approaches with fixed intervals, which involve high costs for repair and replacement activities, and substantial revenue losses. The recent development and evolution of condition-monitoring techniques and the fact that an increasing number of turbines in operation are equipped with online monitoring systems offer the decision maker a large amount of information on the blades’ structural health. So, predictive maintenance becomes feasible. It has the potential to predict the blades’ remaining life in order to support O&M decisions for avoiding major failure events. This paper presents a surrogate model and methodology for estimating the remaining life of a turbine blade. The model can be used within a predictive maintenance decision framework to optimize maintenance planning for the blades’ lifetime.

11 June 2018
Verified
Conference Paper
Closed access
PDF file
BVBoris Vasilyev
Boris Vasilyev
ASAnton Salnikov
Anton Salnikov
ASArtem Semenov
Artem Semenov
LMLiubov Magerramova
Liubov Magerramova
Part 1 of this work discusses the numerical results of the performance efficiency investigation conducted for twin-web (hollow) discs in terms of stress and mass reductions. Three typical turbine discs and one small-sized turbine blisk are analysed using parameterised finite-element models and the modern methods of multi-criteria optimisation. The discs and blisk have different overall sizes and load conditions (rotation speed [rpm]), thermal state, blade load, etc.). The design of disc variants with a split in the hub is also considered. This option will help to simplify the manufacturing technology and improve design efficiency. An analysis of the results shows that a twin-web turbine disc design permits increases in turbine disc strength as well as decreases in its mass. The extent of these advantages depends on the overall size of the disc and its rpm: a large-sized disc with a relatively low rpm shows a 4% mass decrease and a 15% increase in cyclic life; a medium-sized disc with an average rpm has an 18% mass decrease and a doubled cyclic life; and a small-sized disc with high rpm has a 30% mass decrease and a 2.8 times longer cyclic life. Additionally, a small-sized blisk with a high rpm shows a 60% mass and a doubled cyclic life.

16 June 2014
Verified
Conference Paper
Closed access
PDF file
BVBoris Vasilyev
Boris Vasilyev
This paper discusses a novel approach to calculating inelastic strain that incorporates elastic anisotropy in combination with ANSYS finite element analysis (FEA) software to predict the stress–strain state kinetics of a single crystal (SX) nickel-based turbine blade. The approach is based on using “equivalent direction” and allows us to correctly define the critical load value and plastic strain field in SX details for different load types. The suggested approach is simple and generic and requires only a few standard experimental material properties. This should allow for an easy transition to actual blade design application. Predictions of plastic field distribution obtained using the suggested approach with anisotropic specimens are compared with experimental data as well as with the results obtained using a crystallographic approach. Good correlation was achieved. The second goal of this study is to develop a physically based, readily implementable creep model SX superalloy that accurately represents the creep phenomena of these materials under complex, thermomechanical loading conditions.

21 September 2020
Verified
Conference Paper
Closed access
PDF file
BVBoris Vasilyev
Boris Vasilyev
ASAlexander Selivanov
Alexander Selivanov
ASArtem Semenov
Artem Semenov
ABAndrei Bortnikov
Andrei Bortnikov
VLValentina Limonova
Valentina Limonova
The high-pressure turbine blades of most modern gas turbine engines are made of single-crystal alloys. Single-crystal materials have significant anisotropy characteristics; therefore, the orientation of the axes of the single crystal relative to the geometrical axes of the blade has a great effect on the stress-strain state, static strength, and dynamic characteristics of the blade. Here, the necessary optimization of both the axial orientation (the optimal value of which may differ from ) and the azimuthal orientation is confirmed. The problem was solved by considering the anisotropic temperature–orientation characteristics of the alloy and the uneven temperature field of the blade. The values of the optimal crystallographic orientations were determined. Notably, casting tolerances for the deviation of the crystallographic axes must be considered when searching for the optimal position of the axes of the single crystal.

11 June 2018
Verified
Conference Paper
Closed access
PDF file
BVBoris Vasilyev
Boris Vasilyev
ASAnton Salnikov
Anton Salnikov
ASArtem Semenov
Artem Semenov
The difficulty of providing the required strength characteristics of wheel locking joints is due to a complex stress state, the presence of stress concentrators, differences in contacting-part materials’ characteristics, and possible deviations in sizes from nominal values [1]. Providing stable strength characteristics and a low mass are important requirements. This paper suggests an approach to the strength-mass optimization of a disc and fir-tree joint of a high-pressure turbine and considers the scattering of dimensions within tolerances. The main stages of optimization are shown, criteria for evaluating the robustness of the structure are proposed, and recommendations for the practical robust optimization of a real design are given. The results of various optimization approaches and strength-parameter dispersions of various configurations’ locking joints are compared. It is shown that decreasing the number of teeth increases the stability of the strength parameters.