Suresh Kumar Thappeta

Dr. Suresh Kumar Thappeta

Department of Geography and Environmental Development, Ben-Gurion University of the Negev, Beer Sheva 84105, Israel
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2023 in Journal of Hydraulic Engineering
Verified
Journal Article
Open access
PDF file
Suresh Kumar ThappetaSuresh Kumar Thappeta
Suresh Kumar Thappeta
JJJoel P. L. Johnson
Joel P. L. Johnson
EHEran Halfi
Eran Halfi
YPYael Storz Peretz
Yael Storz Peretz
JLJonathan B. Laronne
Jonathan B. Laronne
Hydraulic parameters, including bed shear stress, are challenging to calculate for flash floods. Applying theoretical equations to strongly unsteady flows requires comprehensive and accurate flow data that are difficult to collect for natural events. To empirically evaluate the extent to which simpler calculations can reasonably predict shear stresses in rapidly changing hydrographs, and to determine how bed shear stresses differ for hydraulic bores propagating over dry beds compared to shallow water, we conducted laboratory flume experiments on idealized short-duration flash floods with bores. We compared the Saint-Venant shallow water equation, which theoretically captures the depth-averaged momentum balance of gradually varying unsteady flow to eight simpler methods, with assumptions that are not met in these flows. The Saint-Venant method predicts higher shear stresses immediately after bore arrival, but all of the simpler methods are nonlinearly correlated with the Saint-Venant method even when flow is rapidly changing. While none of the methods we evaluated should strictly apply to rapid changes in depth and velocity of bores, the correlations we found between methods just after bore arrival suggest that, for applications where shear stresses must be calculated but data are insufficient to apply the full Saint-Venant equations, simpler methods may provide meaningful shear stress constraints. Compared to flood bores propagating over a dry bed, bores propagating over shallow flowing water had steeper water surfaces but resulted in significantly lower bed shear stresses immediately after bore arrival. The common characteristic of tsunamis and waves moving onshore, and of dam breaks and flash floods occurring in rivers, is the presence of a sudden large increase in water depth and velocity termed flood bores. These result in an abrupt and large increase in shear stress (the force of the water on the bed), causing fatalities and extensive damage to infrastructures. We generated flood bores in a flume, with instrumentation that automatically monitored water depth, velocity, turbulence and water surface slope of bores arriving on a dry flume bed, with additional experiments of bores arriving on an existing shallow flow. We then calculated and compared the temporal change in shear stress by different methods, and found that, with the exception of the immediate arrival of a bore, shear stress calculated using simple assumptions is similar to the most demanding method. Another conclusion is that the shear stress is very large upon arrival of a bore on a dry bed—larger even than over a body of water. Hence, flood bores unexpectedly arriving on a dry bed are particularly dangerous to people, and their potential damage quantified by shear stress can be calculated using simplified formulas.

1 December 2017 in Journal of Hydrologic Engineering
Verified
Journal Article
Closed access
Suresh Kumar ThappetaSuresh Kumar Thappeta
Suresh Kumar Thappeta
MBMurty Bhallamudi
Murty Bhallamudi
PFPeter Fiener
Peter Fiener
Balaji NarasimhanBalaji Narasimhan
Balaji Narasimhan
Energy loss in a steep open channel due to randomly spaced spherically shaped macroroughness elements such as boulders was investigated using a three-dimensional fluid dynamics solver. First, a relationship for energy loss at large Froude numbers due to a single boulder was derived as a function of flow rate, flow depth, and boulder diameter. Nondimensional energy loss increases with Froude number and decreases with the relative submergence. However, the exponents in the power law relationship are different for three different ranges of submergence ratio: <0.5 , 0.5–1.0, and >1.0 . The energy loss attributable to a cluster of boulders depends on cluster density, Froude number, and submergence ratio. For the same number of boulders, energy loss decreases as cluster density increases. However, variation in the pattern of boulder arrangement has only a marginal effect (<4% ) when the submergence ratio is more than 0.5. The simple procedure proposed for estimating energy loss due to a cluster of randomly distributed boulders of equal size predicts energy loss within 10% accuracy.

31 December 2020 in Water
Verified
Journal Article
Open access
PDF file
Suresh Kumar ThappetaSuresh Kumar Thappeta
Suresh Kumar Thappeta
MBMurty Bhallamudi
Murty Bhallamudi
VCVENU CHANDRA
VENU CHANDRA
PFPeter Fiener
Peter Fiener
Abul BakiAbul Baki
Abul Baki
Three-dimensional numerical simulations were performed for different flow rates and various geometrical parameters of step-pools in steep open channels to gain insight into the occurrence of energy loss and its dependence on the flow structure. For a given channel with step-pools, energy loss varied only marginally with increasing flow rate in the nappe and transition flow regimes, while it increased in the skimming regime. Energy loss is positively correlated with the size of the recirculation zone, velocity in the recirculation zone and the vorticity. For the same flow rate, energy loss increased by 31.6% when the horizontal face inclination increased from 2° to 10°, while it decreased by 58.6% when the vertical face inclination increased from 40° to 70°. In a channel with several step-pools, cumulative energy loss is linearly related to the number of step-pools, for nappe and transition flows. However, it is a nonlinear function for skimming flows.

4 February 2022 in Water
Verified
Journal Article
Open access
PDF file
Suresh Kumar ThappetaSuresh Kumar Thappeta
Suresh Kumar Thappeta
PFPeter Fiener
Peter Fiener
VCVENU CHANDRA
VENU CHANDRA
Accurate estimation of head loss introduced via randomly placed roughness elements found in natural or constructed streams (e.g., fish passages) is essential in order to estimate flow variables in mountain streams, understand formation of niches for aquatic life, and model flow structure. Owing to the complexity of the involved processes and the often missing detailed data regarding the roughness elements, the head loss in such streams is mostly approximated using empirical models. In our study, we utilize flume experiments to analyze the effects of the spatial distribution of roughness elements on water surface levels and head loss and, moreover, use the produced data to test three empirical models estimating head loss. The experiments were performed in a 15 m long, 0.9 m wide flume with a slope of 5% under large Froude numbers (2.5–2.8). Flow velocities and water levels were measured with different flow rates at 58 points within a 3.96 m test section of the flume. We could show that different randomly arranged patterns of roughness elements significantly affected head loss (differences up to 33.6%), whereas water jumps occurred when flow depths were in the same size range as the roughness elements. The roughness element position and its size influenced water surface profiles. None of the three tested empirical models were able to well reproduce the differences in head loss due to the different patterns of roughness elements, with overestimated head loss from 12 to 94.7%, R2 from 41 to 73%, NSE from −21.1 to 0.09, and RRMSE from 18.4 to 93%. This generally indicates that these empirical models are conditionally suitable to consider head loss effects of random patterns of roughness elements.

26 October 2016
Verified
Book Chapter
Closed access
PDF file
Suresh Kumar ThappetaSuresh Kumar Thappeta
Suresh Kumar Thappeta
ASArup K. Sarma
Arup K. Sarma

13 July 2026 in Water Resources
Verified
Journal Article
Closed access
PDF file
SPSanjay Kumar Patle
Sanjay Kumar Patle
SPSakshi Raje Patwardhan
Sakshi Raje Patwardhan
Suresh Kumar ThappetaSuresh Kumar Thappeta
Suresh Kumar Thappeta
Bed shear stress is an important hydraulic parameter influencing sediment transport, channel stability, erosion and deposition. While there are various direct and indirect ways to estimate it, the majority were established for steady or quasi-steady open channel flows. In contrast, flash flood flows are very turbulent, rapidly varying, and significantly unstable, making traditional approaches less trustworthy. This review paper summarizes direct and indirect estimating methodologies, flume experimental studies, and limited field investigations for the flash flood flow. It emphasizes the difficulties/limitations while applying the direct, indirect methods, and obtaining accurate measurements under the intense flows. This paper highlights key research gaps, specifically the scarcity of robust models designed for unsteady non-uniform flows and field-based validation. Future initiatives focus the development of new techniques, high-resolution datasets, and integrated modelling frameworks to better quantify bed shear stress during flash flood flows.