Steady state analysis of flows and pressures in a water distribution network is a major concern for hydraulic engineers involved in the monitoring and control of water distribution systems. Most of the hydraulic network solution strategies currently available are meant for obtaining flows/pressures given a minimum number of measurements. If more measurements than the minimum required are available, then the redundant measurements can be exploited to obtain a better estimate of the state of the network, taking into account noise in these measurements. In this paper, a state estimation technique for well instrumented water distribution networks is described. The proposed method uses graph-theoretic concepts to reduce the dimensionality of the problem and thereby achieves significant computational efficiency. Applicability of the proposed state estimation procedure is demonstrated on realistic urban water distribution networks. It is also shown that the proposed method can be used for state estimation even w...
The Adyar River flowing through Chennai Metropolitan Area (CMA) in Southern India functions as a surplus course of upstream water bodies that are locally known as tanks. During northeast monsoons, the river frequently floods the adjoining city areas. In this study, the impact of dredging and disappearance of tanks on flooding in CMA is analyzed under historical, urbanization, and extreme rainfall scenarios utilizing an urbanization-hydrologic-hydraulic modelling framework. The simulated scenarios highlight the importance of the tanks as a flood control measure for CMA. The major conclusions are (a) dredging the tanks uniformly by 2 m can compensate the increase in flooding due to urbanization by 2050 for 1 in 50-year rainfalls and, (b) for disappearance of tanks, 1 in 50-year rainfall can inundate the city akin to 1 in 100-year rainfalls. The study can be useful for making informed decisions on dredging the tanks, land use planning, and flood control measures for the CMA.
A transition from conventional centralized to hybrid decentralized systems has been increasingly advised recently due to their capability to enhance the resilience and sustainability of urban water supply systems. Reusing treated wastewater for non-potable purposes is a promising opportunity toward the aforementioned resolutions. In this study, we present two optimization models for integrating reusing systems into existing sewerage systems to bridge the supply–demand gap in an existing water supply system. In Model-1, the supply–demand gap is bridged by introducing on-site graywater treatment and reuse, and in Model-2, the gap is bridged by decentralized wastewater treatment and reuse. The applicability of the proposed models is evaluated using two test cases: one a proof-of-concept hypothetical network and the other a near realistic network based on the sewerage network in Chennai, India. The results show that the proposed models outperform the existing approaches by achieving more than a 20% reduction in the cost of procuring water and more than a 36% reduction in the demand for freshwater through the implementation of local on-site graywater reuse for both test cases. These numbers are about 12% and 34% respectively for the implementation of decentralized wastewater treatment and reuse.
1 December 2017 in Journal of Hydrologic Engineering
Energy loss in a steep open channel due to randomly spaced spherically shaped macroroughness elements such as boulders was investigated using a three-dimensional fluid dynamics solver. First, a relationship for energy loss at large Froude numbers due to a single boulder was derived as a function of flow rate, flow depth, and boulder diameter. Nondimensional energy loss increases with Froude number and decreases with the relative submergence. However, the exponents in the power law relationship are different for three different ranges of submergence ratio: , 0.5–1.0, and . The energy loss attributable to a cluster of boulders depends on cluster density, Froude number, and submergence ratio. For the same number of boulders, energy loss decreases as cluster density increases. However, variation in the pattern of boulder arrangement has only a marginal effect ( ) when the submergence ratio is more than 0.5. The simple procedure proposed for estimating energy loss due to a cluster of randomly distributed boulders of equal size predicts energy loss within 10% accuracy.
Three-dimensional numerical simulations were performed for different flow rates and various geometrical parameters of step-pools in steep open channels to gain insight into the occurrence of energy loss and its dependence on the flow structure. For a given channel with step-pools, energy loss varied only marginally with increasing flow rate in the nappe and transition flow regimes, while it increased in the skimming regime. Energy loss is positively correlated with the size of the recirculation zone, velocity in the recirculation zone and the vorticity. For the same flow rate, energy loss increased by 31.6% when the horizontal face inclination increased from 2° to 10°, while it decreased by 58.6% when the vertical face inclination increased from 40° to 70°. In a channel with several step-pools, cumulative energy loss is linearly related to the number of step-pools, for nappe and transition flows. However, it is a nonlinear function for skimming flows.