The flouride-salt-cooled high-temperature reactor (FHR) uses graphite-matrix coated-particle fuel [the same as high-temperature gas-cooled reactors (HTGRs)] and a clean liquid salt coolant. It delivers heat to the industrial process or the power cycle at temperatures between 600°C and 700°C with average heat delivery temperatures higher than for other reactors. The melting point of the liquid salt coolant is above 450°C. The high minimum temperatures present refueling challenges and require special features to control temperatures, avoiding excessively high temperatures and freezing of the coolant that could impact decay heat cooling systems. This paper describes a preconceptual FHR design that addresses many of these challenges by adopting features from the British advanced gas-cooled reactor (AGR) and alternative decay heat cooling systems. The bases for specific design choices are described. The AGRs are carbon dioxide–cooled and graphite-moderated reactors that use cylindrical fuel subassemblies with vertical refueling at 650°C, which meets the FHR high-temperature refueling requirements. Fourteen AGRs have operated for many decades. The AGR uses eight cylindrical fuel subassemblies, each 1 m tall coupled axially together by a metal stringer to create a long fuel assembly. The stringer assemblies are in vertical channels in a graphite core that provides neutron moderation. This geometric core design is compatible with an FHR using graphite-matrix coated-particle fuel. The FHR uses a once-through fuel cycle. The design minimizes used nuclear fuel volumes relative to other FHR and HTGR designs. The primary system is inside a secondary liquid salt–filled tank that (1) provides an added heat sink for decay heat, (2) helps to ensure no freezing of primary system salt, and (3) helps to ensure no major fuel failures in a beyond-design-basis accident. The refueling standpipes above each stringer fuel assembly in the AGR core with modifications can be used in an FHR for refueling and can provide efficient heat transfer between the primary system and the secondary liquid salt–filled tank. The passive decay heat removal system uses heat pipes that turn on and off at a preset temperature to avoid overheating the core in a reactor accident and to avoid freezing the salt coolant as decay heat decreases after reactor shutdown.
Fast sweeping methods are efficient iterative techniques originally developed to solve the steady-state Hamilton-Jacobi equations and later used for the hyperbolic conservation laws. For these boundary value problems, their solution information propagates along characteristics starting from the boundary. These fast sweeping methods take advantage of this property and achieve very fast convergence based on a Gauss-Seidel–type iteration approach and alternating-direction sweeping strategy. In this paper, we solve the SN neutron transport equation using the high-order Lax-Friedrichs Weighted Essentially Non-Oscillatory (LF-WENO) fast sweeping methods. Our numerical tests in one and two dimensions demonstrate that the proposed new sweeping methods can achieve better accuracy and positivity preserving than the diamond difference method for the SN solution.
The SN transport equation asymptotically tends to an equivalent diffusion equation in the limit of optically thick systems with small absorption and sources. A spatial discretization of the SN equation is of practical interest if it possesses the optically thick diffusion limit. Such a numerical scheme will yield accurate solutions for diffusive problems if the spatial mesh size is thin with respect to a diffusion length, whereas the mesh cells are thick in terms of a mean free path. Many spatial discretization methods have been developed for the SN transport equation, but only a few of them can obtain the thick diffusion limit under certain conditions. This paper presents a theoretical result that simply states that the mesh size required for a finite difference scheme to attain the diffusion limit is , where is the order of accuracy of spatial discretization, is the “diffusion” mesh size that can be many mean free paths thick, and is a small positive scaling parameter that can be defined as the ratio of a particle mean free path to a characteristic scale length of the system. Numerical results for schemes such as the Diamond Difference method, Step Characteristic method, Step Difference method, Second-Order Upwind method, and Lax-Friedrichs Weighted Essentially Non-Oscillatory method of the third order (LF-WENO3) are presented that demonstrate the validity and accuracy of our analysis.
It has been well known that the analytic neutron transport solution tends to the analytic solution of a diffusion problem for optically thick systems with small absorption and source. The standard technique for proving the asymptotic diffusion limit is constructing an asymptotic power series of the neutron angular flux in small positive parameter , which is the ratio of a typical mean free path of a particle to a typical dimension of the problem domain. In this paper, first, we provide an analysis of the asymptotic properties of the SN transport eigenvalues. Then, we show that the analytical SN transport solution satisfies the diffusion equation in the asymptotic diffusion limit based on a recently obtained closed-form analytical solution to the one-dimensional monoenergetic SN neutron transport equation. The boundary conditions for the diffusion equation are discussed.