India does not possess any soluble potassium (K) sources but an abundant resource of alumino-silicate rock such as feldspar is available. In the present work, an attempt has been made to unlock the potassium values from feldspar sample by mechanical milling, roasting and leaching and delineating the underlying mineral phase changes. CaCl₂ was found to be effective flux for K release with valuable by-products such as quartz and anorthite. The roasting kinetics follows the product layer diffusion model with an activation energy of 49.50 kJ/mol. It is found that the planetary ball milling has a significant effect on enhancing K-dissolution. With the combination of different treatments, it is possible to recover more than 95% K from feldspar.

Few investigations have focused on the potential uses of artisanal gold (Au) mine tailings, despite the fact that artisanal gold mining activity contributes to environmental issues such as greenhouse gas. Mineralogical characterizations of artisanal gold mine tailings in Miyove gold mine (Baradega and Masogwe) in Rwanda were investigated for potential utilization as a source of valuable gold, using the centrifugal separation technique. Results of X-ray diffraction analysis, energy dispersive X-ray spectroscopy, inductively coupled plasma mass spectrometry, inductively coupled plasma–optical emission spectroscopy, and X-ray fluorescence showed that artisanal gold mine tailings samples have significant amounts of gold to justify economical gold extraction opportunity. The gold grades in the ores and artisanal gold mine tailings were in the ranges of 37–152 and 2–7 g t⁻¹, respectively. Quartz was a major phase, with minor impurities in two different types of gold ores and their respective tailings. The beneficiation carried out using centrifugal separation, regarded as an extension of gravity separation, showed gold grades in the range of 535–1515 g t⁻¹ for gold ores and 36–302 g t⁻¹ for artisanal gold mine tailings. The gold recoveries for ores and artisanal gold mine tailings were in the range of 21.8–47.3% and 46.9–63.8%, respectively. The results showed that the centrifugal separation technique was more efficient in boosting gold recovery compared to the present panning approach employed at the site, which sometimes recover as low as 10%. The results suggest that mineralogical characterization of artisanal gold mine tailings allows for the development and design of a suitable methods for improving gold ore beneficiation and artisanal gold mine tailings reprocessing.

Bauxite residue (or red mud) is a highly alkaline waste generated during the extraction of alumina. As a result of the substantial accumulation of bauxite residue in tailings facilities, there is a growing interest in exploring the potential for reusing this material for other purposes. The main objective of this study is to evaluate the use of activated bauxite residue (ABR) for remediating oil sands process-affected water (OSPW) and as a supplement to municipal wastewater treatment through bench-scale, proof-of-concept studies. The ABR is produced through a reduction roasting process that alters the physicochemical properties of bauxite residue, resulting in the generation of potentially effective adsorbent media. The treatment performance via chemical and biological activity removals (cytotoxicity, estrogenicity, and mutagenicity) was also assessed. For OSPW, ABR treatment resulted in the effective removal of recalcitrant acid-extractable organics (AEOs), with kinetics following the pseudo-second-order and comparable adsorption capacity to other waste materials (e.g., petroleum coke). ABR also effectively reduced the estrogenicity and mutagenicity of OSPW, albeit cytotoxicity increased at higher dosages, possibly due to some components leaching out of the material (e.g., metals). For municipal wastewater, ABR treatment reduced fecal coliform concentrations (>99%), total phosphorus (up to 98%), total ammonia-nitrogen (63%), estrogenicity (nondetectable), and mutagenicity (nondetectable), especially in the primary effluent. The ultimate end use of ABR is for the recovery of valuable metals (especially iron) and as a construction material, but additional work is needed to optimize the dosage (currently in the g/L range) and maximize the use of ABR as an adsorbent prior to its subsequent uses.