A sustained increase in heavy axle loads and cumulative freight tonnages, coupled with increased development of high-speed passenger rail, is placing an increasing demand on railway infrastructures. Some of the most-critical areas of the infrastructure in need of further research are track components used in high-speed passenger, heavy haul and shared infrastructure applications. In North America, many design guidelines for these systems use historical wheel loads and design factors that may not necessarily be representative of the loading currently experienced on rail networks. Without a clear understanding of the nature of these loads and how design processes reflect them, it is impossible to adequately evaluate the superstructure in order to make design improvements. Therefore, researchers at the University of Illinois at Urbana-Champaign are conducting research to lay the groundwork for an improved and thorough understanding of the loading environment imparted into the track structure using wheel loads captured by wheel impact load detectors. This paper identifies several design factors that have been developed internationally, and evaluates their effectiveness based on wheel loads using several existing and new evaluative metrics. New design factors are also developed to represent the wheel-loading environment in a different manner. An evaluative approach to historical and innovative design methodologies will provide improvements to designs, based on actual loading experienced on today’s rail networks.
Railcar condition directly affects the safety, the efficiency, and the reliability of freight railroad operations. Current railcar inspection practices are intended to identify defects before failure, but these practices generally do not enable preventive maintenance because manual, visual inspection is inherently limited. As a result, automated wayside condition-monitoring technologies have been developed to monitor rolling stock condition and facilitate predictive maintenance strategies. Improving the effectiveness of monitoring of railcar conditions could substantially reduce in-service failures and derailments, operational waste, and variability in rail operations and could enhance network productivity, capacity, and reliability. An analysis of the effect of lean production methods on main-line railway operations was conducted to determine the potential impact of improved railcar inspection and maintenance practices made possible by new, automated wayside technologies. Dispatch simulation software was used to quantify the magnitude and the variability of train delay as a function of both traffic level and severity of service outage. The results indicated that the annual cost caused by main-line delay was substantial compared with the annual cost of track and equipment damages from main-line derailments caused by mechanical causes. This work provided an analytical framework to assess the potential cost savings available through improved preventive maintenance strategies.