Images of a woven fabric with missing picks are digitized, and three different image analysis techniques are compared: the Sobel edge operator, the fast Fourier transform, and the discrete wavelet transform. The wavelet transform, used as a multi-resolution spectral filter, is able to give both spectral and frequency information about a fabric. For the samples tested, the wavelet transform can characterize defects due to missing picks and ends faster and more accurately than the other methods.
Solvent-induced performance deterioration in corona charged polypropylene electret filter media was studied. Electret media, exposed to isopropanol (IPA) in the liquid phase, exhibited reduced filtration efficiency with negligible changes in the pressure drop across the media. Scanning electron microscopy imaging indicated no observable morphological changes after IPA exposure. Solvent-induced efficiency deterioration of electret filter media was hypothesized to originate from charge deterioration rather than charge masking. The charge of the individual fibers in filter media was characterized using electrostatic force microscopy (EFM). EFM investigation produced evidence that exposure to IPA in the liquid phase affected the electrostatic charges on fibers. Exposure to organic solvents such as xylene, toluene, and ethyl benzene has been reported to increase charge mobility in polypropylene fibers, thereby reducing the electrostatic charge and the ability of the fibers in the electret filter media to capture particulates.
Modeling and analyses of filtration efficiency in electrostatically charged monolith filters are important for evaluating and designing this class of filters. Unlike traditional fibrous filters which comprise external flow around a fiber, monolith filters are modeled as internal flow through small channels. Analogous to single fiber theory for external flows, single channel theory is used to analyze basic fluid mechanics in monolith filters and predict filtration efficiencies. The model incorporates three forces: hydrodynamic forces, electrostatic forces, and Brownian motion. Fluid velocity within the channels is calculated by using an analytical solution for circular channel flow, within which the slip boundary condition is considered because of small length scales. This velocity field is then used to evaluate the drag force on the particle according to Stokes’s law. For this model, a one-way coupling between the fluid flow and the particle motion is assumed due to the fact that the relaxation time for the particles simulated in this paper is very small compared to the time the particles spend in the channel. The electrostatic field is computed assuming a uniform charge distribution on the inner surface of a cylindrical channel of finite length. Using a Monte Carlo simulation, particles are randomly injected into a single channel to determine the filtration efficiency.