This article presents lithium niobate (LiNbO₃) based on shear horizontal (SH0) resonators, utilizing a suspended structure, for radio frequency (RF) applications. It demonstrates the design, analysis, and fabrication of SH0 resonators based on a 36Y-cut LiNbO₃ thin film. The spurious-free SH0 resonator achieves an electromechanical coupling coefficient ($k_t^2$) of 42.67% and a quality factor (Q_r) of 254 at the wave-propagating orientation of 0° in the 36Y-cut plane.

Due to the influence of the optical proximity effect (OPE), it is easy for a pattern of photoresistance to be inconsistent with a design pattern, thus damaging the performance of a SAW resonator. To solve this problem, this paper proposes an optimization method for SAW filters based on optical proximity correction (OPC). This method can avoid the tip discharge problem of SAW filters by suppressing the problem of rounding and shrinking of dummy electrode and electrode tail caused by OPE. This method increases the quality factor (Q) of the SAW resonator and thus decreases the insertion loss of the SAW filter. The filter increases the bandwidth by 1.8 MHz at −1.5 dB after applying the OPC method. Additionally, it improves the stability of the filter under high power conditions.