It was the aim of the work described here to develop a validated analytical method for the determination of N-nitrosamines in food simulants. Here, we present the validation of a liquid chromatography–atmospheric pressure chemical ionisation–tandem mass spectrometry method for the determination of 13 N-nitrosamines in the food simulants deionised water, 3% acetic acid and 10% ethanol. Method validation encompassed linearity, LOD, LOQ, recovery, precision and stability of the N-nitrosamines. The method was found to be sufficiently rugged and suitable for routine analysis. In addition, the developed method is on average 10 times more sensitive than the gas chromatography–thermal energy analyser (GC-TEA) method that is currently stipulated in Recommendation XXI for commodities based on natural and synthetic rubber issued by the German Federal Institute for Risk Assessment (BfR). The developed method was applied to determine the N-nitrosamine contents in migration solutions of 12 elastomer samples covering a range of different elastomer types. In 10 out of 12 samples, N-nitrosamines were determined. In most samples, the guidance value of 1 µg/dm2 specified in BfR Recommendation XXI was not exceeded. In conclusion, the analytical method presented here offers a useful alternative to the GC-TEA method currently stipulated in BfR Recommendation XXI. This is of wider relevance, since BfR recommendations are used for compliance assessment of Article 3, paragraph 1 a of the Regulation (EC) No. 1935/2004 with respect to their health safety.
Elastomers are not a uniform class of materials but comprise a broad spectrum of chemically different polymers. Sealing gaskets, gloves, teats, conveyor belts and tubing are examples of elastomers being used as food contact materials (FCMs). Ten elastomer samples were evaluated with respect to the content of extractable compounds, migration of substances into ethanolic food simulants, swelling in food simulants and release of elements in different food simulants. The number of extractable substances <1000 Da was determined by comprehensive two-dimensional gas chromatography coupled with flame ionisation detection (GC × GC–FID) analysis of tetrahydrofuran (THF) extracts. The number of signals ranged from 61 (a thermoplastic elastomer (TPE)) to 690 (a natural rubber/styrene-butadiene-rubber blend (NR/SBR)). As for risk assessment, the decisive factor is which substances reach the food. The extent of substances that migrate into ethanolic food simulants was investigated. Elastomer FCMs can be the source of food contamination with heavy metals. Notably, contamination with lead was detected in some samples investigated in this study. It was shown that food simulants harbour the potential to morphologically alter or even disintegrate elastomeric materials. The results presented here highlight the importance to carefully choose the elastomer type for the intended use as FCMs as not every application may prove safe for consumers.
27 August 2024 in Bundesgesundheitsblatt - Gesundheitsforschung - Gesundheitsschutz