The solid particle suspension inside a flotation machine is significantly dependent on the flow field, particularly the flow hydrodynamics characteristics near the bottom of the flotation machine. In this study, a laser Doppler anemometer (LDA) was utilized to investigate the influence of the impeller diameter and the impeller off-bottom clearance of a flotation machine on the flow velocity distribution characteristics near its bottom. The results showed that centripetal, centrifugal, and transitional spiral ascending vortexes were generated for different cases of the impeller variables. The impeller diameter and the off-bottom clearance were found to have a significant and interactive influence on the flow pattern, radial and axial velocities, velocity vector distribution, and axial fluctuating root mean square (RMS) velocity characteristics. When the centripetal flow was generated with a large impeller diameter and a small off-bottom clearance, the vortex stability was improved, the low-velocity distribution area was reduced near the bottom center, and the high axial RMS velocity distribution area was extended and became more consistent. The latter provided an advantageous condition for the momentum transfer between the liquid flow and the solid particles, as well as the airflow. However, the axial RMS velocity in the centrifugal flow formed in other cases of the impeller variables was less than that in the centripetal flow. Although the increase in the impeller off-bottom clearance contributed to increasing the velocity magnitude, this is certainly disadvantageous to the service life of the impeller blades, as expected from the high-velocity area extension. These results may provide a reference for the impeller design and optimization of a KYF (Kuang Yuan Flotation) flotation machine, as well as a basis for further investigation on the behavior of the dispersed phases inside a flow field.