Filament condition during hot-wire chemical vapor deposition conditions of multi-walled carbon nanotubes is a major concern for a stable deposition process. We report on the novel application of electron backscatter diffraction to characterize the carburization of tungsten filaments. During the synthesis, the W-filaments transform to W2C and WC. W-carbide growth followed a parabolic behavior corresponding to the diffusion of C as the rate-determining step. The grain size of W, W2C, and WC increases with longer exposure time and increasing filament temperature. The grain size of the recrystallizing W-core and W2C phase grows from the perimeter inwardly and this phenomenon is enhanced at filament temperatures in excess of 1,400°C. Cracks appear at filament temperatures >1,600°C, accompanied by a reduction in the filament operational lifetime. The increase of the W2C and recrystallized W-core grain size from the perimeter inwardly is ascribed to a thermal gradient within the filament, which in turn influences the hardness measurements and crack formation.
Lead halide thin films, such as lead iodide (PbI2) and lead chloride (PbCl2), are used as precursor films for perovskite preparation, which is frequently achieved by vacuum thermal evaporation but rarely by the low-pressure chemical vapor deposition (CVD) method. Here, we report on the deposition of PbI2 and PbCl2 thin films on glass substrates by employing the low-pressure CVD method. The effect of the substrate temperature on the structure and morphology of the lead halide films is investigated. Crystalline films were realized for both lead halides, with PbI2 films showing high texture compared to the reduced texture of the PbCl2 films. Large lateral grain sizes were observed for the PbI2 films with a flat platelet grain morphology and an average grain size up to 734.2 ± 144.8 nm. PbCl2 films have columnar grains with an average grain size up to 386.7 ± 119.5 nm. The PbI2 films showed a band gap of about 2.4 eV, confirming its semiconducting properties, and the PbCl2 had a wide band gap of 4.3 eV, which shows the insulating properties of this material.