Visualization of heat transport in heat pipes using thermocamera: Heat pipes, as passive elements show a high level of reliability when taking heat away and they can take away heat flows having a significantly higher density than systems with forced convection. A heat pipe is a hermetically closed duct, filled with working fluid. Transport of heat in heat pipes is procured by the change of state of the working fluid from liquid state to steam and vice versa and depends on the hydrodynamic and heat processes in the pipe. This study have been focused on observing the impact these processes have on the heat process, the transport of heat within the heat pipe with the help of thermovision. The experiment is oriented at scanning the changes in the surface temperatures of the basic structural types of capillary heat pipes in vertical position.

Loop heat pipes (LHPs) are used in many branches of industry, mainly for cooling of electrical elements and systems. The loop heat pipe is a vapour-liquid phase-change device that transfers heat from evaporator to condenser. One of the most important parts of the LHP is the porous wick structure. The wick structure provides capillary force to circulate the working fluid. To achieve good thermal performance of LHP, capillary wicks with high permeability and porosity and fine pore radius are expected. The aim of this work was to develop porous structures from copper and nickel powder with different grain sizes. For experiment copper powder with grain size of 50 and 100 μm and nickel powder with grain size of 10 and 25 μm were used. Analysis of these porous structures and LHP design are described in the paper. And the measurements’ influences of porous structures in LHP on heat removal from the insulated gate bipolar transistor (IGBT) have been made.

This paper deals with the experimental research and verification of a passive cooling system operating on the principle of a loop gravity heat pipe designed for cooling electrical cabinets. This type of cooling works automatically by changing the state of the working substance and thus saves energy consumption. Since the designed cooling system ensures heat transfer from the interior cabinet to the outdoor space, where the heat can naturally dissipate to the surroundings, it is dustproof. The heat pipe consists of an innovative evaporator concept designed to minimize liquid and vapour phase interference in the refrigeration circuit. The aim of the research was to experimentally determine the limit performance parameters of the refrigeration system for different volumes of working medium in the evaporator and decrease heat loss in the cabinet interior. The designed device was verified experimentally and by mathematical calculations as well. The greatest benefit of the work is that the cooling device was able to ensure temperature conditions inside the electrical enclosure at a heat load of 2000 W under 60 °C, 1500 W under 55 °C, 1000 W under 50 °C, 750 W under 45 °C and 500 W under 40 °C.

This work deal with heat pipes experiments depending on the gravity, because gravity is one of the phenomenon which affects the heat transport ability of the heat pipe. In heat pipe technology is gravity on the one side positive when ensure the circulation of the working fluid in gravity heat pipe (GHP) (thermosiphon) and on the other side negative when act opposite the capillary action in the wick heat pipe (WHP). The work describes principle, design and construction of gravity heat pipe (GHP) and wick heat pipe (WHP). Experimental determination influences gravity on the heat transport ability of gravity heat pipes by changing working position. Experimental and mathematical determination influences gravity on the heat transport ability of wick heat pipes by changing working position.

EPJ Web of Conferences, open-access proceedings in physics and related sciences

EPJ Web of Conferences, open-access proceedings in physics and related sciences