Acoustic echo sounders designed to map and discriminate organisms in the water column have primarily been deployed on ships. Because of acoustic attenuation of higher frequencies used to detect and discriminate micronekton and nekton, this has effectively restricted the range of this information to the upper water column. In an effort to overcome these range limitations by reducing the distance between the transducer and the targets of interest, dual-frequency (38 and 120 kHz) split-beam echo sounders were integrated into a Remote Environmental Monitoring Units (REMUS) 600 autonomous underwater vehicle (AUV), effectively doubling the range of quantitative acoustic data into the mesopelagic zone (600–1200 m). Data from the first set of missions in a range of conditions revealed that the AUV provided a stable platform for the echo sounders and improved vertical and horizontal positional accuracy over echo sounders towed by ships. In comparison to hull-mounted echo sounders, elimination of ship noise and surface bubbles provided a 17- and 19-dBW decrease in the noise floor for the 38- and 120-kHz echo sounders, respectively, effectively increasing the sampling range by 30%–40%. The extended depth range also increased the resolution of the acoustic horizontal footprint from 37–40 to 0.6–3.7 m, enabling discrimination of individual targets at depth. Also developed here is novel onboard echo sounder data processing and autonomy to allow sampling not feasible in a surface ship or towed configuration. Taken together, these data demonstrate an effective new tool for examining the biology of animals in the mesopelagic zone (600–1200 m) in ways previously only possible in the upper ocean.
Seawater has been irradiated using a train of flashes from a laser source. This wavelength is on resonance with the blue absorption peak of Chlorophyll pigment associated with the photosystem of in vitro phytoplankton. The resulting fluorescence at is instantaneously recorded during each laser pulse using a streak camera. Delayed fluorescence is observed, yielding clues about initiation of the photosynthetic process on a nanosecond time scale. Further data processing allows for determination of the functional absorption cross section, found to be , which is the first reporting of this number for in vitro phytoplankton. Unlike other flash-pump studies of Chlorophyll, using a LED or flashlamp-based sources, the short laser pulse used here does not reveal any pulse-to-pulse hysteresis (i.e., variable fluorescence), indicating that the laser pulses used here are not able to drive the photosynthetic process to completion. This is attributed to competition from a back reaction between the photoexcited photosystem II and the intermediate electron acceptor. The significance of this work as a new type of deployable ocean fluorimeter is discussed, and it is believed the apparatus will have applications in thin-layer phytoplankton research.
22 November 2007 in Journal of Geophysical Research: Oceans
Many bioluminescence observations are made from the ocean's surface. However, the depth of the bioluminescent source is difficult to estimate on the basis of surface observations alone, given the variable light attenuation of unknown concentrations of water column constituents such as phytoplankton, colored dissolved organic matter, and detritus. Part 1 of this paper showed that bioluminescent water‐leaving radiance signals are detectable, even in extremely turbid and dynamic coastal waters. Here, in part 2 of this paper, we analyze the water‐leaving radiance patterns of bioluminescence modeled by HydroLight 4.2 to determine if the depth of the bioluminescent source can be estimated from its spectral signature. We find that the depth of the bioluminescent source is contained within the spectral signal and can be elucidated by simple neural networks. These networks can predict the depth of a bioluminescent layer with great accuracy, solely on the basis of the spectral shape of bioluminescent water‐leaving radiance in a variety of water column and bottom type conditions. In addition, we found that as little as three wavelengths from the spectrum of water‐leaving radiance are sufficient for an accurate determination of the depth of the bioluminescent source.
The ocean environment and the physical and biological processes that govern dynamics are complex. Sampling the ocean to better understand these processes is difficult given the temporal and spatial domains and sampling tools available. Biological systems are especially difficult as organisms possess behavior, operate at horizontal scales smaller than traditional shipboard sampling allows, and are often disturbed by the sampling platforms themselves. Sensors that measure biological processes have also generally not kept pace with the development of physical counterparts as their requirements are as complex as the target organisms. Here, we attempt to address this challenge by advocating the need for sensor-platform combinations to integrate and process data in real-time and develop data products that are useful in increasing sampling efficiencies. Too often, the data of interest is only garnered after post-processing after a sampling effort and the opportunity to use that information to guide sampling is lost. Here we demonstrate a new autonomous platform, where data are collected, analyzed, and data products are output in real-time to inform autonomous decision-making. This integrated capability allows for enhanced and informed sampling towards improving our understanding of the marine environment.