Sandra Bermejo

Dr. Sandra Bermejo

orcid

Research Focus & Metrics

Academic Career Length

24Years (2003-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 February 2012 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Open access
FDFrancisco J. Delgado
Francisco J. Delgado
Jose Manuel B91794131Jose Manuel B91794131
Jose Manuel B91794131
JGJuan Garcia
Juan Garcia
CTCristina L. Tarrida
Cristina L. Tarrida
POPablo R. Ortega
Pablo R. Ortega
SBSandra Bermejo
Sandra Bermejo
This paper describes the design, fabrication, simulation, and experimental results of an improved miniaturized two-axis sun sensor for industrial applications, created by adapting a technology used previously in satellite applications. The sensor for each axis is composed of six photodiodes integrated in a crystalline-silicon substrate and a layer of cover glass, which is used to protect the silicon and to hold the windows. The high precision is obtained by the subdivision of the field of view, which is ±60°, with a resolution of 0.1°. Each region is controlled by an independent high-precision solar sensor. The sensor can be used for sun-tracking applications in a photovoltaic system, heliostat concentration plants, and lighting applications.

1 June 2006 in Journal of Applied Physics
Verified
Journal Article
Closed access
MSMartin C. Schubert
Martin C. Schubert
SRStephan Riepe
Stephan Riepe
SBSandra Bermejo
Sandra Bermejo
WWWilhelm Warta
Wilhelm Warta
We present spatially resolved and injection dependent excess carrier lifetime measurements on silicon. At low level injection conditions an anomalous increase often interferes in such measurements. The origin of the anomalous increase is discussed. Assuming trapping as the origin, highly resolved images of trap parameters together with low level injection recombination lifetimes with strongly reduced trapping effects have been obtained. A theoretical model for infrared lifetime imaging based on the Hornbeck and Haynes model [J. A. Hornbeck and J. R. Haynes, Phys. Rev. 97, 311 (1955)] is presented which describes the trapping effect on the measured lifetime. This model is fitted to experimental spatially resolved data to extract trapping parameters, particularly trap density and the trap-escape ratio, i.e., the ratio between escape rate of minority carriers from the trap level into the minority band (detrapping) and trap rate from the minority band into the trap level (trapping). An upper bound for the low level injection recombination lifetimes is determined. Lifetime and trapping parameters are compared with dislocation density maps. A strong correlation is found between the total trap density and the crystal defect density.

17 January 2008 in Progress in Photovoltaics: Research and Applications
Verified
Journal Article
Closed access
PDF file
POPablo Ortega
Pablo Ortega
SBSandra Bermejo
Sandra Bermejo
LCLuis Castañer
Luis Castañer

12 January 2013 in Discover Nano
Verified
Journal Article
Open access
PDF file
ACArnau Coll
Arnau Coll
SBSandra Bermejo
Sandra Bermejo
DHDavid Hernández
David Hernández
LCLuis Castañer
Luis Castañer
This work introduces the electrospray technique as a suitable option to fabricate large-scale colloidal nanostructures, including colloidal crystals, in just a few minutes. It is shown that by changing the deposition conditions, different metamaterials can be fabricated: from scattered monolayers of polystyrene nanospheres to self-assembled three-dimensional ordered nanolayers having colloidal crystal properties. The electrospray technique overcomes the main problems encountered by top-down fabrication approaches, largely simplifying the experimental setup. Polystyrene nanospheres, with 360-nm diameter, were typically electrosprayed using off-the-shelf nanofluids. Several parameters of the setup and deposition conditions were explored, namely the distance between electrodes, nanofluid conductivity, applied voltage, and deposition rate. Layers thicker than 20 μm and area of 1 cm2 were typically produced, showing several domains of tens of microns wide with dislocations in between, but no cracks. The applied voltage was in the range of 10 kV, and the conductivity of the colloidal solution was in the range of 3 to 4 mS. Besides the morphology of the layers, the quality was also assessed by means of optical reflectance measurements showing an 80% reflectivity peak in the vicinity of 950-nm wavelength.

28 June 2011 in Langmuir
Verified
Journal Article
Closed access
VVVito Di Virgilio
Vito Di Virgilio
SBSandra Bermejo
Sandra Bermejo
LCLuis Castañer
Luis Castañer

1 June 2014 in Microelectronic Engineering
Verified
Journal Article
Closed access
ACArnau Coll
Arnau Coll
SBSandra Bermejo
Sandra Bermejo
LCLuis Castañer
Luis Castañer