Ahmed Abdulqader Hussein

Dr. Ahmed Abdulqader Hussein

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 December 2015 in Sensors
Verified
Journal Article
Open access
PDF file
AHAhmed Abdulqader Hussein
Ahmed Abdulqader Hussein
TRTharek Abd Rahman
Tharek Abd Rahman
CLChee Yen Leow
Chee Yen Leow
Localization is an apparent aspect of a wireless sensor network, which is the focus of much interesting research. One of the severe conditions that needs to be taken into consideration is localizing a mobile target through a dispersed sensor network in the presence of physical barrier attacks. These attacks confuse the localization process and cause location estimation errors. Range-based methods, like the received signal strength indication (RSSI), face the major influence of this kind of attack. This paper proposes a solution based on a combination of multi-frequency multi-power localization (C-MFMPL) and step function multi-frequency multi-power localization (SF-MFMPL), including the fingerprint matching technique and lateration, to provide a robust and accurate localization technique. In addition, this paper proposes a grid coloring algorithm to detect the signal hole map in the network, which refers to the attack-prone regions, in order to carry out corrective actions. The simulation results show the enhancement and robustness of RSS localization performance in the face of log normal shadow fading effects, besides the presence of physical barrier attacks, through detecting, filtering and eliminating the effect of these attacks.

1 March 2020 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
JJJalal Mohammed Jalil
Jalal Mohammed Jalil
AHAhmed Abdulqader Hussein
Ahmed Abdulqader Hussein
AFAnwar Jabbar Faisal
Anwar Jabbar Faisal
This study experienced the performance of air biased PV/T collector partially covered with glass at various values of irradiance (400, 600, 800, 1000) W/m 2 and constant ambient temperature. A three various configurations have been demonstrated in this work, case A (glass at inlet portion), case B (glass at mid portion) and case C (glass at outlet portion). The investigation has been performed in term of outlet air temperature and electrical power. A numerical model was developed via using the computational fluid dynamic (CFD) program. 3D steady state, turbulent forced convection model is utilized to solve Navier Stokes and energy equations of air flowing inside the duct. The results compared with the experimental measurements that carried out from indoor conditions using solar simulator, a strong agreement has been achieved between experimental and numerical outcomes. It has been observed that case C ( glass at outlet portion) is more favorable in electrical and thermal gain, which generates 44.3°C hot air and 26.6 W electric power, while the maximum outlet air temperature and electric power reach 39 °C, 25.4 W and 43 °C, 21.05 W for configurations A and B respectively. Furthermore, the analysis of PV/T system concluded that the PV/T system should be operate at moderate air flowrate (0.013 kg/s) which is the specific or optimum flowrate.

11 May 2017 in PLOS ONE
Verified
Journal Article
Open access
PDF file
AHAhmed Abdulqader Hussein
Ahmed Abdulqader Hussein
CLChee Yen Leow
Chee Yen Leow
TRTharek A. Rahman
Tharek A. Rahman
Localization of the wireless sensor network is a vital area acquiring an impressive research concern and called upon to expand more with the rising of its applications. As localization is gaining prominence in wireless sensor network, it is vulnerable to jamming attacks. Jamming attacks disrupt communication opportunity among the sender and receiver and deeply impact the localization process, leading to a huge error of the estimated sensor node position. Therefore, detection and elimination of jamming influence are absolutely indispensable. Range-based techniques especially Received Signal Strength (RSS) is facing severe impact of these attacks. This paper proposes algorithms based on Combination Multiple Frequency Multiple Power Localization (C-MFMPL) and Step Function Multiple Frequency Multiple Power Localization (SF-MFMPL). The algorithms have been tested in the presence of multiple types of jamming attacks including capture and replay, random and constant jammers over a log normal shadow fading propagation model. In order to overcome the impact of random and constant jammers, the proposed method uses two sets of frequencies shared by the implemented anchor nodes to obtain the averaged RSS readings all over the transmitted frequencies successfully. In addition, three stages of filters have been used to cope with the replayed beacons caused by the capture and replay jammers. In this paper the localization performance of the proposed algorithms for the ideal case which is defined by without the existence of the jamming attack are compared with the case of jamming attacks. The main contribution of this paper is to achieve robust localization performance in the presence of multiple jamming attacks under log normal shadow fading environment with a different simulation conditions and scenarios.

1 November 2020 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
SHSaja Mohammed Hussein
Saja Mohammed Hussein
KSKhansaa D Salman
Khansaa D Salman
AHAhmed Abdulqader Hussein
Ahmed Abdulqader Hussein
Shape memory alloys are considered smart alloys due to their properties, such as biocompatibility, superelasticity (SE) and shape memory effect (SME). These alloys are used in many applications (actuators, MEMS, biomedical and aerospace). In this work, the effect of adding the silver element to the NiTi alloy with different atomic percentages (zero, one, two and three at.% Ag) on mechanical properties, such as macrohardness and wear, was studied. The samples of this work were prepared by the casting method using a VAR furnace to obtain homogeneous shape memory alloys. The purity of the elements was Ni 99.2 %, Ti 99.7 % and Ag 99.99 %. In this work, many examinations were carried out to define the characteristics of the manufactured shape memory alloys, such as FESEM and OM, for microstructural analysis. Meanwhile, the mechanical properties were defined using macrohardness and wear tests. The results of the mechanical tests showed a slight impact in the percentage of the wear resistance and macrohardness at the point of increasing the silver element ratio to the binary alloy (NiTi). The photomicrographs of the OM and FESEM examinations showed that the Ag element is homogeneously distributed in the NiTi matrix. In addition, the FESEM examination showed the emergence of the martensite phase, austenite phase and some impurities. The results of the DSC test showed the degrees of the phase transformation for each alloy, and the SME recovery rate of 89.99% was achieved. Furthermore, the surface topography was analysed using an optical microscope for all the tested samples. The obtained results emphasised that the movement between the disc and the pins leads to a rise in the friction temperature and the formation of the layer of oxidation. These oxidation layers will be ploughed and uprooted to create many grooves at the surface of the samples. Hence, these grooves are similar for all samples and increased with increasing loads.

1 March 2020 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
RGRajaa Khalaf Gaber
Rajaa Khalaf Gaber
AHAhmed Abdulqader Hussein
Ahmed Abdulqader Hussein
MOManal Kadhim Oudah
Manal Kadhim Oudah
ARAhmed Hameed Reja
Ahmed Hameed Reja
Image compression solutions are a pivotal field that gain over a remarkable research interest and called upon to extend widely with respect to the increasing of its applications. The considerable challenge of this solution is related to the storage and bandwidth requirements. A highly compression rate with a high image resolution is considered to be the key factors for implementing a robust image compression technique. In this paper, the proposed method is deemed to be simple and effective due to using different levels of compression process which is starting from dividing the image into sub-images and using high level discrete wavelet transform (DWT). In addition, the Huffman code with non-uniform Quantizer has been used to minimize the compression data rate with high quality reconstructed image. The promising simulation results of the proposed method achieved the most two significant criteria which are denoted by high image quality and a high image compressed ratio. For instance, the proposed strategy simulation results of Lena image achieved PSNR equals to 42.4094 dB with a compression ratio (CR) equals to 47.5435. Moreover, the simulation results of Flower image accomplished PSNR equals to 42.8348 dB with a compression ratio equals to 55.3389 under the same simulation conditions.