Robin Gitschel

Mr. Robin Gitschel

TU Dortmund
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2022 in Journal of Manufacturing Science and Engineering
Verified
Journal Article
Closed access
PDF file
RGRobin Gitschel
Robin Gitschel
OHOliver Hering
Oliver Hering
ASAndré Schulze
André Schulze
ATA. Erman Tekkaya
A. Erman Tekkaya
It is investigated to what extent the evolution of ductile damage in cold forging can be controlled without changing the geometry of the produced part. Besides the effects of strain hardening and residual stresses, damage, which is the nucleation, growth and coalescence of voids on microscopic level, affects product properties of the manufactured components such as fatigue strength, impact strength, or elastic stiffness. Former investigations have shown that the load path-dependent damage evolution in forward rod extrusion, and thus, the performance of produced parts can be controlled by the process parameters extrusion strain and shoulder opening angle. As these parameters also affect the geometry of extruded parts, design requirements of components might be violated by varying these. Thus, counterpressure is used to superpose purely hydrostatic stresses to forward rod extrusion in order to decrease triaxiality in the forming zone without causing geometric variations in the produced parts. The counterpressure is either introduced by a counterpunch or by modified process routes. The achieved improvements in product performance are in agreement with results obtained by variation of extrusion strain and shoulder opening angle as described in the literature. In addition, it is observed in tensile tests that damage in cold extruded parts does not significantly affect flow stress. All advancements in product performance are realized without affecting the products’ geometries.

24 December 2024 in International Journal of Solids and Structures
Verified
Journal Article
Open access
RGRobin Gitschel
Robin Gitschel
JGJohannes Gebhard
Johannes Gebhard
YKYannis P. Korkolis
Yannis P. Korkolis
ATA. Erman Tekkaya
A. Erman Tekkaya

26 December 2020 in Metals
Verified
Journal Article
Open access
PDF file
RGRobin Gitschel
Robin Gitschel
FKFelix Kolpak
Felix Kolpak
OHOliver Hering
Oliver Hering
ATA. Erman Tekkaya
A. Erman Tekkaya
In this paper a process sequence, that uses forward rod extrusion with cold forged C15 steel cup billets to produce lightweight shafts, is presented. The steel cup billets feature either a lightweight magnesium alloy core or a granular medium core that is removed after forming to obtain hollow shafts without the need of complex tools and highly loaded mandrels. It is shown that composite shafts featuring magnesium cores can be produced for a wide range of extrusion strains. Due to high hydrostic pressures in forward rod extrusion, the forming limit of magnesium at room temperature can be expanded. The observed bond strength between core and sheath is below the shear yield strength of utilized magnesium AZ31 alloy. Hollow shafts are successfully produced with the presented process route by utilizing zirconium oxide beads or quartz sand as a lost core. As the law of constant volume in metal forming is violated by compressible granular media, a simulation approach using a modified Drucker-Prager yield surface to model these materials is validated to provide a tool for efficient process design. Granular cores and magnesium alloy cores offer new possibilities in production of lightweight shafts by means of composite cold forging. Both process variants allow for higher weight savings than composite shafts based on aluminum cores.

16 June 2023 in Advances in Industrial and Manufacturing Engineering
Verified
Journal Article
Open access
RGRobin Gitschel
Robin Gitschel
ASA. Schulze
A. Schulze
ATA.E. Tekkaya
A.E. Tekkaya

14 April 2026 in Key Engineering Materials
Verified
Journal Article
Open access
PDF file
RGRobin Gitschel
Robin Gitschel
ATA. Erman Tekkaya
A. Erman Tekkaya
YKYannis Korkolis
Yannis Korkolis
Forming processes significantly influence the product properties of a formed workpiece. Next to the effects of work hardening and residual stresses, the influence of ductile damage determines the final performance of a formed component. Thus, precise damage models are crucial for designing new forming process sequences. In general, this is achieved by modelling the evolution of damage as a function of hydrostatic and deviatoric stress, characterized by the stress triaxiality and the Lode-parameter. However, calibrating damage models to the effects of triaxiality and the Lode-parameter is not trivial, since experiments usually represent a combination of both influences. A recent experimental approach by the authors offers the possibility to vary the Lode-parameter in extrusion experiments while keeping the triaxiality constant. This paper aims to use this data of the isolated deviatoric effect on damage to calibrate a damage evolution equation. The model is calibrated to void area fraction measurements obtained by scanning electron microscopy of extruded case-hardening steel 16MnCrS5. For validation, the model predictions for non-constant Lode-parameter histories are compared to corresponding experiments. The model and experiments are in good agreement.

17 September 2023 in Proceedings in Applied Mathematics and Mechanics
Verified
Journal Article
Open access
FGFabian Guhr
Fabian Guhr
RGRobin Gitschel
Robin Gitschel
FBFranz‐Joseph Barthold
Franz‐Joseph Barthold
ATA. Erman Tekkaya
A. Erman Tekkaya
Numerical optimisation is applied to rod extrusion in order to generate optimal parameter sets which result in reduced damage accumulation. A brief overview of academic applications for damage optimisation is given. Their restrictions are reflected upon, leading to the proposed framework utilising the commercial software Abaqus FEA, which enables optimisation of industrial problems with frictional contact. The framework is setup modularly to enable arbitrary choices of design variables, such as geometric parameters, and process parameters like friction coefficients or boundary conditions. The optimisation strategy is applied to forward hollow extrusion. Compared to forward rod extrusion, an additional design variable, that is, the mandrel radius, is introduced into the forming process, which increases the design space.