Thirty years ago, dye-sensitized solar cells (DSSCs) emerged as a method for harnessing the sun’s energy and converting it into electricity. Since then, a lot of work has been dedicated to improving their global photovoltaic efficiency and their eco-sustainability. Recently, various articles showed the great potential of copper complexes as a convenient and cheap alternative to the traditional ruthenium dyes. In addition, copper complexes demonstrate that they can act as redox mediators for DSSCs, thus being an answer to the problems related to the I₃⁻/I⁻ redox couple. The aim of this review is to report on the most recent impact made by copper complexes as alternative redox mediators. The coverage, mainly from 2016 up to now, is not exhaustive, but allows us to understand the great role played by copper complexes in the design of eco-sustainable DSSCs.

Three decades ago, dye-sensitized solar cells (DSSCs) emerged as a method for harnessing the energy of the sun and for converting it into electricity. Since then, a lot of work has been devoted to create better global photovoltaic efficiencies and long term stability. Among photosensitizers for DSSCs, thiocyanate-free ruthenium(II) complexes have gained increasing interest due to their better stability compared to conventional thiocyanate-based complexes, such as benchmark dyes N719 and Z907. In this mini-review, two classes of thiocyanate-free Ru(II) complexes are presented: (a) bis-bipyridyl compounds bearing an ancillary cyclometalating bidentate ligand; (b) bipyridyl compounds bearing non-cyclometalating ancillary ligands. The coverage, mainly from 2014 up to now, is not exhaustive, but illustrates the most recent design strategies and photovoltaic properties of these two families of ruthenium(II) dyes.

The production of electricity in a greener and more sustainable way by employing renewable sources is a great challenge in modern times. Photovoltaic systems represent an important possibility because sunlight is the most abundant renewable source. In this review article, recent studies (from 2018 to the present) involving novel iron and copper complexes employed as dyes in Dye-Sensitized Solar Cells (DSSCs) are reported; mono- and bimetallic Fe complexes, Cu-based dyes, and devices presenting both metals are discussed, together with the performances of the DSSCs reported in the papers and the corresponding values of the main parameters employed to characterize such solar cells. The feasibility of DSSCs employing copper and iron dyes, alone or in combination with other earth-abundant metals, is demonstrated. The proper optimization of the sensitizers, together with that of the electrolyte and of the semiconducting layer, will likely lead to the development of highly performing and cheap photovoltaic devices for future applications on a much larger scale.

Three decades ago, dye-sensitized solar cells (DSSCs) emerged as a route for harnessing the sun’s energy and converting it into electricity. Since then, an impressive amount of work has been devoted to improving the global photovoltaic efficiency of DSSCs, trying to optimize all components of the device. Up to now, the best efficiencies have usually been reached with ruthenium(II) photosensitizers, even if in the last few years many classes of organic compounds have shown record efficiencies. However, the future of DSSCs is stringently connected to the research and development of cheaper materials; in particular, the replacement of rare metals with abundant ones is an important topic in view of the long-term sustainability of DSSCs intended to replace the consolidated fossil-based technology. In this context, copper is a valid candidate, being both an alternative to ruthenium in the fabrication of photosensitizers and a material able to replace the common triiodide/iodide redox couple. Thus, recently, some research papers have confirmed the great potential of copper(I) coordination complexes as a cheap and convenient alternative to ruthenium dyes. Similarly, the use of copper compounds as electron transfer mediators for DSSCs can be an excellent way to solve the problems related to the more common I₃⁻/I⁻ redox couple. The goal of this mini-review is to report on the latest research devoted to the use of versatile copper complexes as photosensitizers and electron shuttles in DSSCs. The coverage, from 2022 up to now, illustrates the most recent studies on dye-sensitized solar cells based on copper complexes as molecular materials.

The presence of a 8% wt N^C^N-Pt( ii ) complex bearing mesityl groups on pyridines leads to an efficient blue-emitting OLED with CIE coordinates of (0.13, 0.29).

Substitution of the diglyme ligand of [Eu(hfa)₃(diglyme)] (where hfa is hexafluoroacetylacetonate) with a simple 1,10-phenanthroline leads to a six-fold increase of the product μβ_EFISH, as measured by the Electric-Field-Induced Second Harmonic generation (EFISH) technique. Similarly, [Eu(tta)₃(1,10-phenanthroline)] (where Htta is 2-thenoyltrifluoroacetone) is characterized by a large second-order NLO response. Both 1,10-phenanthroline europium complexes have great potential as multifunctional materials for photonics.