The conducted review of the experiments for pressure losses and convection heat transfer in toroidal and coiled tubes yielded 2,410 pressure losses data for water, air, and ethylene glycol flows in 62 different coiled tubes. These data are used to develop a friction factor correlation, in terms of a modified Dean number. The compiled Nusselt number database of 176 data points for flows of water, air, and water–10% and 43.5% glycerol mixtures and additional 17 data points for flows of ethylene glycol, n-amyl alcohol, n-butanol, and n-amyl acetate, with higher Prandtl numbers of 15–175, is correlated in terms of the modified Reynolds number. The friction factor and Nusselt number correlations span the entire range of the data, and agree with the data to within ±20%. In addition, the experimental data of the critical Reynolds number are correlated to within ±10%. The developed correlations are compared to those reported previously. The comparison of the calculated results for a coiled tube and a straight tube, of the same diameter and total length, quantifies the relative heat transfer enhancement and increase in pressure losses. A review of the thermal development in toroidal and coiled tubes indicates that the value and the oscillatory behavior of the local Nusselt number depend on the angular location.
A premiere free-access and peer-reviewed frontier journal site, serving the needs of the thermal-fluids community. See the latest research or submit an article. Quickly share your research with the global thermal-fluids community, for increased citations and impact at no cost.
1 April 2016 in International Journal of Heat and Mass Transfer
The breakup of a thin non-evaporating liquid film that is either flowing down or climbing on a vertical or inclined surface and subject to cocurrent or countercurrent interfacial shear (or gas flow) is investigated analytically. Analytical expressions for the dimensionless liquid film thickness, $\Delta_{\hbox{\scriptsize\it min}}$, and wetting rate, $\Gamma_{\hbox{\scriptsize\it min}}$, at breakup are derived based on the minimization of the total energy of a stable rivulet, formed following the film breakup. For a downflowing liquid film, increasing the cocurrent interfacial shear (or gas velocity) or decreasing the equilibrium contact angle, $\theta_{o}$, decreases both $\Delta_{\hbox{\scriptsize\it min}}$ and $\Gamma _{\hbox{\scriptsize\it min}}$, below their values with zero interfacial shear. Conversely, increasing the countercurrent interfacial shear or $\theta_{o}$, increases both $\Delta_{\hbox{\scriptsize\it min}}$ and $\Gamma_{\hbox{\scriptsize\it min}}$, above their values with zero interfacial shear. The predictions of $\Delta _{\hbox{\scriptsize\it min}}$ and $\Gamma _{\hbox{\scriptsize\it min}}$ for a climbing water film on a vertical surface are in good agreement with reported experimental data for a wide range of cocurrent gas velocities.