Natural tanzanites usually show strongly trichroic coloration from violet to blue, and brown colors in different directions. However, this characteristic is easily changed to violet-blue dichroism after heat treatment. Moreover, the cause of color modification after heating is still controversial. A few researchers have previously suggested that trace amounts of either vanadium or titanium substituted in aluminum site should be the main determinant of color after the heat treatment. Alteration of either V3+ to V4+ or Ti3+ to Ti4+ may relate to light absorption around 450–460 nm, which is the main cause. UV/vis/NIR absorption spectroscopy and X-ray absorption spectroscopy (XAS), a utility of synchrotron radiation, were applied for this experiment. As a result, the violet-blue absorption band (centered around 450–460 nm) as well as green absorption band (centered around 520 nm) were obviously decreased along the c-axis after heating, and XAS analysis indicated the increasing of the oxidation state of vanadium. This result was well supported by the chemical composition of samples. Consequently, vanadium was strongly suggested as the significant coloring agent in tanzanite after heat treatment.
For decades, unraveling the heat treatment of sapphire has been a challenging issue. The present study offers new aspects that support the detection of heat treatment of sapphire. Natural geuda sapphire exhibits orange to red luminescence under longwave ultraviolet (LWUV; 365 nm) light, while heated geuda sapphire shows blue luminescence under shortwave ultraviolet (SWUV; 225 nm) light. The presence of melt inclusions in dissolved silks serves as an indicator of sapphire heat treatment. Fourier-transform infrared (FTIR) spectroscopy alone is insufficient for distinguishing unheated from heated sapphire. By combining orange to red luminescence with blue luminescence and melt inclusions, we provide a practical method for accurately differentiating natural gem-quality sapphire and heated gem-quality sapphire.
Sapphires from alluvial deposits associated with Cenozoic basalts in Southern Vietnam were collected for investigation of mineral inclusions. In this report, primary iron oxide inclusions were focused on, with detailed mineral chemistry using a Raman spectroscope and electron probe micro-analyzer. Consequently, a variety of iron oxide inclusions were recognized as wüstite, hercynite, and ilmenite. Ilmenite falling within an ilmenite–hematite series ranged in composition between Il24-30He36-38Mt35-40 and Il49-54He34-40Mt7-10, classified as titanomagnetite and titanohematite, respectively. Wüstite with non-stoichiometry, (Fe2+0.3-0.9)(Ti3+<0.179Al3+≤0.6Cr3+<0.1Fe3+≤0.46)☐≤0.23O, was associated with hercynite inclusions, clearly indicating cogenetic sapphire formation. Wüstite and sapphire appear to have been formed from the breakdown reaction of hercynite (hercynite = sapphire+wüstite) within a reduction magma chamber. Titanohematite and titanomagnetite series might have crystallized during iron–titanium reequilibration via subsolidus exsolution under a slightly oxidized cooling process.
For decades, unravelling heat treatment of sapphire has been a challenging issue. The present study offers new aspects that support the detection of heat treatment of sapphire. Natural unheated sapphire is distinguishable from heated sapphire by its orange to red luminescence under long-wave ultraviolet (LWUV, 365 nm) light, whereas blue luminescence under short-wave ultraviolet (SWUV, 254 nm) light indicates their heated counterparts. UV-excited photoluminescence shows a linkage between a broad emission spectrum within the orange to red region and orange to red luminescence of natural unheated sapphire under LWUV illumination, as well as an emission spectrum around the green region and blue luminescence of heated sapphire under SWUV illumination. Furthermore, the presence of melt inclusions within dissolved silks may be used as an indicator of heat treatment of sapphire. It seems that Fourier-transform infrared (FTIR) spectroscopy alone is inadequate for distinguishing unheated and heated sapphire. The application of orange to red, and blue luminescence together with melt inclusions offer a novel and practicable procedure for more precise differentiation of unheated versus heated sapphire.