Hamideh Kaffash

Dr. Hamideh Kaffash


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 January 2021 in Processes
Verified
Journal Article
Open access
PDF file
HKHamideh Kaffash
Hamideh Kaffash
GSGerrit Ralf Surup
Gerrit Ralf Surup
MTMerete Tangstad
Merete Tangstad
Charcoal is an interesting reducing agent because it is produced from biomass which is renewable and does not contribute to global warming, provided that there is a balance between the felling of timber and growth of trees. Biocarbon is a promising alternative to fossil reductants for reducing greenhouse gas emissions and increasing sustainability of the metallurgical industry. In comparison to conventional reductants (i.e., petroleum coke, coal and metallurgical coke), charcoal has a low density, low mechanical properties and high CO2 reactivity, which are undesirable in ferroalloy production. Densification is an efficient way to upgrade biocarbon and improve its undesirable properties. In this study, the deposition of carbon from methane on three types of charcoal has been investigated at 1100 °C. CO2 reactivity, porosity and density of untreated and densified charcoal were measured, and results were compared to metallurgical coke. Surface morphology of the charcoal samples was investigated by using scanning electron microscopy (SEM). SEM confirmed the presence of a deposited carbon layer on the charcoal. It was found that the CO2 reactivity and porosity of charcoals decreased during the densification process, approaching that of fossil fuel reductants. However, the CO2 reactivity kept higher than that of metallurgical coke.

26 May 2022 in Energies
Verified
Journal Article
Open access
PDF file
GSGerrit Ralf Surup
Gerrit Ralf Surup
HKHamideh Kaffash
Hamideh Kaffash
YMYan Ma
Yan Ma
ATAnna Trubetskaya
Anna Trubetskaya
JPJohan Berg Pettersen
Johan Berg Pettersen
MTMerete Tangstad
Merete Tangstad
Renewable reductants are intended to significantly reduce CO2 emissions from ferro-alloy production, e.g., by up to 80% in 2050 in Norway. However, charcoals provide inferior properties compared to fossil fuel-based reductants, which can hamper large replacement ratios. Therefore, conditioning routes from coal beneficiation was investigated to improve the inferior properties of charcoal, such as mechanical strength, volatile matter, CO2 reactivity and mineral matter content. To evaluate the global warming potential of renewable reductants, the CO2 emissions of upgraded charcoal were estimated by using a simplified life cycle assessment, focusing on the additional emissions by the energy demand, required chemicals and mass loss for each process stage. The combination of ash removal, briquetting and high-temperature treatment can provide a renewable coke with superior properties compared to charcoal, but concomitantly decrease the available biomass potential by up to 40%, increasing the CO2-based global warming potential of industrial produced charcoal to ≈500 kg CO2-eq. t−1 FC. Based on our assumptions, CO2 emissions from fossil fuel-based reductants can be reduced by up to 85%. A key to minimizing energy or material losses is to combine the pyrolysis and post-treatment processes of renewable reductants to upgrade industrial charcoal on-site at the metallurgical plant. Briquetting showed the largest additional global warming potential from the investigated process routes, whereas the high temperature treatment requires a renewable energy source to be sustainable.

25 January 2022 in JOM
Verified
Journal Article
Open access
PDF file
HKHamideh Kaffash
Hamideh Kaffash
MTMerete Tangstad
Merete Tangstad
The Boudouard reactivity of metallurgical coke and densified charcoals was investigated in this study. Potassium is known to accumulate in ferromanganese furnaces and hence was evaluated as a catalyst of CO2 reactivity. Samples were impregnated using a gaseous impregnation technique with K2CO3.The reactivity experiments were designed to simulate conditions occurring in an industrial furnace, as used for production of Mn-alloys. To find out the catalytic effect of potassium, the concentration varied from a fraction of a percent up to 5 wt.%. The results show that with increasing potassium content, the CO2 reactivity of coke and charcoal increased, and this change was more significant for coke. The CO2 reactivities of coke and densified charcoal were much closer to each other at the highest content of potassium. Scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDS) showed that potassium distributed on the surface as well as on deposited carbon particles formed on densified charcoal.

17 September 2020 in Journal of Iron and Steel Research International
Verified
Journal Article
Open access
PDF file
HKHamideh Kaffash
Hamideh Kaffash
MTMerete Tangstad
Merete Tangstad
Carbon dissolution from four types of metallurgical cokes and graphite was investigated by using immersion rods in a resistance furnace to clarify the influence of factors governing the rate of carbon dissolution from carbonaceous materials into Fe–Mn melts at 1550 °C. The factors studied were the microstructure of carbonaceous materials, roughness, porosity and the wettability between carbonaceous materials and the melt. Carbon/metal interface was characterised by scanning electron microscopy accompanied with energy-dispersive X-ray spectrometry to investigate the formation of an ash layer. The results showed that coke E had the highest dissolution rate. Surface roughness and porosity of the carbonaceous materials seemed to be dominant factors affecting the dissolution rates. Further, crystallite size did not have a significant effect on the dissolution rates. Solid/liquid wettability seemed to affect the initial stage of dissolution reaction. The dissolution mechanism was found to be both mass transfer and interfacial reactions.

7 January 2020 in Journal of Dispersion Science and Technology
Verified
Journal Article
Open access
HKHamideh Kaffash
Hamideh Kaffash
XXXing Xing
Xing Xing
MTMerete Tangstad
Merete Tangstad
Four metallurgical cokes were heat treated at 1250 °C to 1550 °C in argon atmosphere. The influence of heat treatment on the microstructure of metallurgical cokes was characterized using X-ray diffraction and Raman spectroscopy. Wettability experiments were carried out using the sessile drop technique. The wettability of cokes with liquid Fe-85wt%Mn at 1550 °C was measured as a function of time. The effect of coke ash content, microstructure, porosity and roughness on the wettability was investigated. In the process of heat treatment, the microstructure of the metallurgical cokes transformed toward the graphitic structure. The Raman spectra showed variations reflecting their temperature histories. Area fraction of G peak increased as the annealing temperature increased and intensity ratios of D to G band decreased with temperature. All the four coke samples showed non-wetting behavior with Fe-85wt%Mn while graphite showed wetting behavior. Coke E with the highest roughness and porosity showed the lowest wettability compared to other cokes. Crystallite size of the coke samples did not seem to have any significant effect on the wettability.

19 August 2018
Verified
Book Chapter
Closed access
PDF file
HKHamideh Kaffash
Hamideh Kaffash
MTM. Tangstad
M. Tangstad