In this study, we report the synthesis of ZnO nanoparticles from Zn dross via hydrometallurgical method by using acetic acid as a leaching agent. D205 dye molecules were then adsorbed onto Zn dross originated ZnO nanoparticle film. The optical absorption confirms the photosensitization of the synthesized ZnO nanoparticles with dye. The photoluminescence spectra reveal the excitonic- and defect-related emission of ZnO nanoparticles. Compared to ZnO nanoparticles only, the longer emission lifetime of ZnO nanoparticles with adsorbed dye indicates the transfer of photoexcited electrons from dye to the ZnO nanoparticles. Furthermore, photodetection characterization of ZnO film show the enhanced current density with the presence of dye under simulated solar illumination, while that measured at dark is similar in both films with and without dye. This result confirms the potentiality of Zn dross to be recycled into valuable ZnO nanoparticles particularly for the applications in the visible light region, especially for sensing.
1 March 2019 in Journal of Physics: Conference Series
We studied the effect of using N2 as a gas carrier on the structural and mechanical properties of Fe-Al coating. Typically, using air as the gas carrier in flame spray coating method was prone to the formation of intrinsic Fe-oxide(s), thus reducing its further resistance against oxidation at elevated temperature. The use of N2 to replace air as the gas carrier was conducted in this research to minimize the possible Fe-oxide(s) formation. We found that there were still Fe-oxide (wuestite) formed even after the replacement, indicating the contribution of O2 gas used in the fuel mixture (Acetylene/O2) and/or oxygen from the environment on the oxidation. Further optimization was then conducted by tuning the Acetylene/O2 gas ratio under N2 gas carrier and cooling down the sprayed samples under N2 gas exposure. Samples free of Fe-oxide(s) species thus have been successfully obtained. The effect of spraying distance was also studied to improve the intermetallic formation. Higher hardness of the shorter distance samples gives early indication of the improvement of mechanical properties induced by the intermetallic formation.