Rafał GOŁĘBSKI

Dr. Rafał GOŁĘBSKI

Czestochowa University of Technology, Faculty of Mechanical Engineering and Computer Science, Department of Technology and Automation
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 February 2023 in Materials
Verified
Journal Article
Open access
PDF file
Peter PokornýPeter Pokorný
Peter Pokorný
DSDaynier Rolando Delgado Sobrino
Daynier Rolando Delgado Sobrino
Štefan VáclavŠtefan Václav
Štefan Václav
Jana PetruJana Petru
Jana Petru
Rafał GOŁĘBSKIRafał GOŁĘBSKI
Rafał GOŁĘBSKI
This paper introduces novel research into specific mechanical properties of composites produced by 3D printing using Continuous-Fiber Fabrication (CFF). Nylon (Onyx) was used as the composite base material, while carbon constituted the reinforcement element. The carbon fiber embedment was varied in selected components taking values of 0°, 45°, 90°, and 135° for parts undergoing tensile testing, while one specific part type was produced combining all angles. Carbon-fiber-free components with 100% and 37% fillings were also produced for comparison purposes. Parts undergoing the Charpy impact test had the fibers deposited at angles of 0° and 90°, while one part type was also produced combining the four angles mentioned before. Carbon-fiber-free parts with 100% and 37% fillings were also produced for comparison purposes as with the first part. The Markforged MARK TWO 3D printer was used for printing the parts. These were subsequently scanned in the METROTOM 1500 computed tomography and submitted to the tensile and impact tests. The results showed that adding carbon fiber to the base material increased the volume of defects in the samples as a result of the porosity increase. Although the tensile testing manifested an overall increase in tensile strength Rm of up to 12 times compared to the sample without reinforcement, it was proven that an improper fiber orientation significantly diminished the strength and that combining the four selected angles did not lead to the highest strength values. Finally, the impact tests also showed that fiber-reinforced parts implied up to 2.7 times more work to fracture, and that an improved fiber orientation also led to strength reduction.

30 November 2023 in Materials
Verified
Journal Article
Open access
PDF file
PBPiotr Boral
Piotr Boral
Rafał GOŁĘBSKIRafał GOŁĘBSKI
Rafał GOŁĘBSKI
RKRuzena Kralikova
Ruzena Kralikova
Gear drives are widely used in various fields and applications due to their properties and capacity. Their versatility, durability, and ability to transmit high torques as well as precision and reliability make them extremely useful in many fields of technology. They are widely used in industrial and energy machinery, vehicle drive systems, aerospace, medical devices, and many other areas. Gears can be manufactured using many technologies. This work focuses mainly on machining with particular emphasis on high-performance new technologies. The process of mathematical modeling of the gear and the machined profile is strongly related to CNC machining technologies. A robust correlation of systems supporting the design and modeling of sliding gears needed for the manufacturing process is presented in the article. It is very important to properly assess gears with correct manufacturing in accordance with a specific standard. The article presents an analysis of available methods for controlling gears using coordinate measurement techniques. Gear machining methods were assessed in terms of the technologies used as well as their productivity and manufacturing tolerance.

23 December 2020 in Polymers
Verified
Journal Article
Open access
PDF file
AGAdam Gnatowski
Adam Gnatowski
Rafał GOŁĘBSKIRafał GOŁĘBSKI
Rafał GOŁĘBSKI
PSPiotr Sikora
Piotr Sikora
This paper presents an analysis of the impact of modification of thermomechanical properties of polymer materials on the process of gear wheel machining on a CNC machine tool. Polymer materials Tecaflon (PVDA) and polyethylene (PE) were used for processing. The materials underwent thermal modification i.e., annealing. Prepared samples (gear wheel dimensions Ø76.5 × 20 mm) were machined under the same conditions, only changing the feed rate parameter. A CNC milling machine of its own construction was used for machining with a horizontal numerical dividing attachment. The obtained gear wheels were tested using ZEISS GEAR PRO gear analyzes software. Deviations of the involute outline and the tooth line allowed classification of wheels in the 9th grade of accuracy. Machined teeth surfaces were examined for changes in the properties of surface layer, taking into account the influence of polymer material thermal modification on the surface condition. The samples were tested for mechanical properties (tensile strength) and thermomechanical properties (DSC and DMTA). The tests showed positive changes in material strength and significant improvements in PVDA Tecaflon after heat treatment.

28 May 2021 in Materials
Verified
Journal Article
Open access
PDF file
Rafał GOŁĘBSKIRafał GOŁĘBSKI
Rafał GOŁĘBSKI
PBPiotr Boral
Piotr Boral
Classic methods of machining cylindrical gears, such as hobbing or circumferential chiseling, require the use of expensive special machine tools and dedicated tools, which makes production unprofitable, especially in small and medium series. Today, special attention is paid to the technology of making gears using universal CNC (computer numerical control) machine tools with standard cheap tools. On the basis of the presented mathematical model, a software was developed to generate a code that controls a machine tool for machining cylindrical gears with straight and modified tooth line using the multipass method. Made of steel 16MnCr5, gear wheels with a straight tooth line and with a longitudinally modified convex-convex tooth line were machined on a five-axis CNC milling machine DMG MORI CMX50U, using solid carbide milling cutters (cylindrical and ball end) for processing. The manufactured gears were inspected on a ZEISS coordinate measuring machine, using the software Gear Pro Involute. The conformity of the outline, the tooth line, and the gear pitch were assessed. The side surfaces of the teeth after machining according to the planned strategy were also assessed; the tests were carried out using the optical microscope Alicona Infinite Focus G5 and the contact profilographometer Taylor Hobson, Talysurf 120. The presented method is able to provide a very good quality of machined gears in relation to competing methods. The great advantage of this method is the use of a tool that is not geometrically related to the shape of the machined gear profile, which allows the production of cylindrical gears with a tooth and profile line other than the standard.

1 April 2018 in Tehnicki vjesnik - Technical Gazette
Verified
Journal Article
Open access
PDF file
Rafał GOŁĘBSKIRafał GOŁĘBSKI
Rafał GOŁĘBSKI
ŽIŽeljko Ivandić
Željko Ivandić
The article presents an analysis of the modification of the toothing of spur gears. The aim of the modification of the profile on the tooth tip is to compensate for the tooth deflection under loading and to improve the conditions of gear...

15 September 2022 in Materials
Verified
Journal Article
Open access
PDF file
PBPiotr Boral
Piotr Boral
Rafał GOŁĘBSKIRafał GOŁĘBSKI
Rafał GOŁĘBSKI
Cylindrical worms are generally machined by the hobbing method using rotary tools, and they are formed in the finishing pass at the full profile height. In this case, the profile of the tool-action surface determines the profile of the machined surface, and for technological reasons, a rectilinear (less frequently circular) axial profile of the tool-action surface is generally assumed. In the currently known technology, machining takes place on special machine tools, and on tools that are specially prepared for a specific outline. The research objective of the article is to present the possibility of creating a helical surface with a circular concave profile on a CNC lathe with a universal tool: a ball-end mill cutter. In the case of the proposed processing method, the surface of the worm is shaped with a spherical-end mill cutter in many passes, and its shape depends on the setting of the tool. This machining method must be performed on CNC machines, and the tool is not geometrically related to the shape of the machined profile. The paper presents the mathematical apparatus for generating a concave helical surface. Based on the calculations, the worm was processed with a spherical-end mill on a CLX350 V4 DMG MORI turning machining center. The surface-quality analysis was carried out on a contact profilographometer, while the dimensional accuracy was verified on a coordinate-measuring machine, and the maximum tolerance field of the measurement was 13 μm. On the basis of the measurements made, the accuracy of the worm outline is consistent with the theoretical assumptions. Using the presented method of machining, we can shape helical surfaces with an assumed profile in the axial section on a CNC machine tool with the use of universal tools.